Green and Intelligent Forming Technology and Its Applications for High Strength Lightweight Materials

doi:10.3969/j.issn.1004-132X.2020.22.013

Abstract

Abstract: Research achievements and current status of high strength light material green and intelligent forming processes were reviewed. Intelligent processing design of cold stamping, intelligent tailor property of hot stamping and intelligent stamping systems and equipment were mainly introduced. Green intelligent stamping forming technology of complex components made of light and high strength materials was discussed and prospected in the aspects of applications of process design systems of cold stamping with high strength steels, post-form precision control of cold stamping with aluminum alloy, tailor properties of hot stamping with high strength steels and mechanics property control of hot stamping with aluminum alloy, which aimed to give reference for intelligent forming processes of lightweight and high strength alloy.

Key words: high strength lightweight material, intelligent stamping processing design, tailor microstructure and property, intelligent system and equipment

摘要： 对高强轻质材料绿色智能成形技术的研究成果和现状进行综述，重点介绍了近年来高强轻质材料绿色智能成形技术在冷冲压工艺智能设计、热冲压组织性能智能定制、冲压智能系统与装备三方面的重要研究进展。对高强轻质材料复杂构件绿色智能冲压成形技术在高强钢冷冲压工艺设计系统中的应用，铝合金冷冲压成形后的精度控制，高强钢热冲压的性能定制以及铝合金热冲压性能调控方面进行了探讨和展望，旨在为高强轻质材料绿色智能成形技术的发展提供借鉴。

关键词: 高强轻质材料, 智能冲压工艺设计, 组织性能定制, 智能系统与装备

CLC Number:

TG306

HUA Lin, WEI Pengfei, HU Zhili, . Green and Intelligent Forming Technology and Its Applications for High Strength Lightweight Materials[J]. China Mechanical Engineering, DOI: 10.3969/j.issn.1004-132X.2020.22.013.

华林, 魏鹏飞, 胡志力, . [材料绿色成形技术]高强轻质材料绿色智能成形技术与应用[J]. 中国机械工程, DOI: 10.3969/j.issn.1004-132X.2020.22.013.

References

［1］SCHNEIDER R, GRANT R J, SCHLOSSER J M, et al. An Investigation of the Deep Drawing Beha-vior of Automotive Aluminum Alloys at Very Low Temperatures［J］. Metallurgical and Materials Transactions A, 2019, 51:1123-1133.
［2］PANDYA K S, ROTH C C, MOHR D. Strain Rate and Temperature Dependent Fracture of Aluminum Alloy 7075:Experiments and Neural Network Mo-deling［J］. International Journal of Plasticity, 2020, 51:102788-102839.
［3］NAKAGAWA Y, MORI K I, SUZUKI Y, et al. Tailored Tempering without Die Heating in Hot Stamping of Ultra-high Strength Steel Parts［J］. Materials & Design, 2020, 192:108704-108715.
［4］AVUOLU O, AVUOLU O, YLMAZOLU A G, et al. Microstructural Features and Mechanical Properties of 22MnB5 Hot Stamping Steel in Different Heat Treatment Conditions［J］. Journal of Materials Research and Technology, 2020, 9(5):10901-10908.
［5］LI Huanhuan, HU Zhili, HUA Lin, et al. Optimization of Hot Forming-quenching Integrated Process Parameters for Complex Aluminum Alloy Automotive Components［J］. Rare Metal Materials and Engineering, 2019, 48(4):1029-1035.
［6］ZHANG Wenpei, HU Zhili, LI Huanhuan, et al. Experimental and Numerical Investigation on Springback of Automotive Aluminum Alloy Sheet［J］. Rare Metal Materials and Engineering, 2019, 48(7):2130-2137.
［7］LI Huanhuan, HU Zhili, HUA Lin, et al. Influence of Thermal Deformation Parameters on Mechanical Properties and Microstructure Evolution of AA7075 Aluminum Alloy during Hot Stamping-Quenching Process［J］. JOM, 2019, 71(12):4778-4788.
［8］LEONG W D, LAM H L, NG W P Q, et al. Lean and Green Manufacturing—a Review on Its Applications and Impacts［J］. Process Integration and Optimization for Sustainability, 2019, 3:5-23.
［9］曹华军,李洪丞,曾丹，等.绿色制造研究现状及未来发展策略［J］.中国机械工程, 2020, 31(2):135-144.
CAO Huajun, LI Hongcheng, ZENG Dan, et al. The State-of-art and Future Development Strategies of Green Manufacturing［J］. China Mechanical Engineering, 2020, 31(2):135-144.
［10］XU Zhichao, LIU Yanxiong, HUA Lin, et al. Energy Analysis and Optimization of Main Hydraulic System in 10 000 kN Fine Blanking Press with Simulation and Experimental Methods［J］. Energy Conversion and Management, 2019, 181:143-158.
［11］TAO Wenjin, LAI Zehao, LEU M C, et al. A Self-aware and Active-guiding Training & Assistant System for Worker-centered Intelligent Manufacturing［J］. Manufacturing Letters, 2019, 21:45-49.
［12］WANG Lihui. From Intelligence Science to Intelligent Manufacturing［J］. Engineering, 2019, 5(4):595-812.
［13］KUMAR S P L. State of the Art-intense Review on Artificial Intelligence Systems Application in Process Planning and Manufacturing［J］. Engineering Applications of Artificial Intelligence, 2017, 65:294-329.
［14］JUNG I D, SHIN D S, KIM D, et al. Artificial Intelligence for the Prediction of Tensile Properties by Using Microstructural Parameters in High Strength Steels［J］. Materialia, 2020, 11:100699-100739.
［15］WANG A, ELFAKIR O, LIU J, et al. Multi-objective Finite Element Simulations of a Sheet Metal-forming Process via a Cloud-based Platform［J］. International Journal of Advanced Manufacturing Technology, 2018, 100:2753-2765.
［16］LIAO S H. Expert System Methodologies and Applications： a Decade Review from 1995 to 2004［J］. Expert Systems with Application, 2005, 28(1):93-103.
［17］JIN Z, LUO S, FANG X D. KBS-aided Design of Tube Bending Processes［J］. Engineering Applications of Artificial Intelligence, 2001, 14(5):599-606.
［18］NARANJE V, KUMAR S. A Knowledge-based Systemfor Strip-layout Design for Progressive Deep Drawing Dies［J］. International Journal of Computer Applications in Technology, 2013, 48(3):222-234.
［19］周杰,阳德森,李路,等.基于可控拉深筋的高强度板拉深性能优化及预测［J］.同济大学学报(自然科学版), 2010, 38(12):1796-1801.
ZHOU Jie, YANG Desen, LI Lu, et al. Formability Improvement and Prediction of High Strength Steel Based on Controllable Drawbead［J］. Journal of Tongji University(Natural Science), 2010, 38(12):1796-1801.
［20］MA Wenyu, YANG Jianwei, ZHANG jun, et al. Analysis and Multi-objective Optimization on the Stamping of High Strength Steel［C］∥ Atlantis Highlights in Intelligent Systems. Beijing, 2018:218-220.
［21］谢晖, 袁志鹏, 王诗恩,等. 基于KBE的B柱全流程冲压工艺设计及系统开发［J］. 热加工工艺, 2016,45(13):133-138.
XIE Hui, YUAN Zhipeng, WANG Shien, et al. Design and System Development of Whole Flow Path Stamping Process for B-pillar Based on KBE［J］. Hot Working Technology, 2016,45(13):133-138.
［22］左哲. 典型车身超高强钢结构件冷冲压工艺智能设计系统开发［D］. 武汉:武汉理工大学, 2020.
ZUO Zhe. Development of Intelligent Design System for Cold Stamping Process of Typical High-strength Steel Structural Parts［D］. Wuhan:Wuhan University of Technology, 2020.
［23］REN Shengle, LAI Yinan, WU Guangfei, et al. Intelligent Prediction of Process Parameters for Cold Bending［J］. Advanced Materials Research, 2011, 154/155:74-78.
［24］ZHAO Jun, WANG Fengquin. Parameter Identification by Neural Network for Intelligent Deep Drawing of Axisymmetric Workpieces［J］. Journal of Materials Processing Technology, 2005, 166(3):387-391.
［25］段嘉鑫. 3A21铝合金微波天线反射面冲压成形回弹分析及控制［D］. 武汉:武汉理工大学, 2020.
DUAN Jiaxin. Springback Analysis and Control of A3A21 Aluminum Alloy Microwave Antenna Reflective Surface Stamping［D］. Wuhan:Wuhan University of Technology, 2020.
［26］LI Huanhuan, HU Zhili, HU Wenzhi, et al. Forming Quality Control of an AA5182-O Aluminum Alloy Engine Hood Inner Panel［J］. JOM, 2019, 71(5):1687-1695.
［27］WANG Ailing, LIU Jun, GAO Haoxiang, et al. Hot Stamping of AA6082 Tailor Welded Blanks:Experiments and Knowledge Based Cloud FE (KBC-FE) Simulation［J］. Journal of Materials Processing Technology, 2017, 250:228-238.
［28］PETRI H, DUY P, YUQIUGE H. Cloud Manufacturing-scheduling as a Service for Sheet Metal Manufacturing［J］. Computers & Operations Research, 2019, 110:208-219.
［29］BULLING A, BLANKE U, SCHIELE B. A Tutorial on Human Activity Recognition Using Body-worn Inertial Sensors［J］. ACM Computing Surveys, 2014, 46(3):1-33.
［30］CHENG Guojian, LIU Liting, QIANG Xinjian, et al. Industry 4.0 Development and Application of Intelligent Manufacturing［C］∥ IEEE International Conference on Information System & Artificial Intelligence. Hong Kong, 2016:407-410.
［31］WANG L, AN X Y, ZHU B, et al. Research on Intelligent Process and Production Method of Hot Stamping［C］∥ Advanced High Strength Steel and Press Hardening. Xian, 2017:486-491.
［32］HUANG Wenjiang, MARTIN P, ZHUANG Houlong. Machine-learning Phase Prediction of High-entropy Alloys［J］. Acta Materialia, 2019, 169:225-236.
［33］MEREDIG B, WOLVERTON C. A Hybrid Computational-experimental Approach for Automated Crystal Structure Solution［J］. Nature Materials, 2013, 12(2):123-127.
［34］CHOKSHI P, DASHWOOD R J, HUGHES D J. Artificial Neural Network(ANN) Based Microstructural Prediction Model for 22MnB5 Boron Steel during Tailored Hotstamping［J］. Computers & Structures, 2017, 190:162-172.
［35］ZHOU Jing, WANG Baoyu, HUANG Mingdong, et al. Effect of Hot Stamping Parameters on the Mechanical Properties and Microstructure of Cold-rolled 22MnB5 Steel Strips［J］. International Journal of Minerals, Metallurgy and Materials, 2014(6):544-555.
［36］MU Yanhong, WANG Baoyu, ZHOU Jing, et al. Influences of Hot Stamping Parameters on Mechanical Properties and Microstructure of 30MnB5 and 22MnB5 Quenched in Flat Die［J］. Journal of Central South University, 2018, 25(4):736-746.
［37］刘鹏,龙曲波,尤宝卿,等.超高强度钢板热成形软区关键技术的研发［J］.锻造与冲压, 2019（16）:29-33.
LIU Peng, LONG Qubo, YOU Baoqing, et al. Research and Development of Key Technology of Ultra High Strength Steel Sheet with Hot Forming Soft Zone［J］. Forging & Metal Forming, 2019（16）:29-33.
［38］SHEN Yuhan, SONG Yanli, HUA Lin, et al. Influence of Plastic Deformation on Martensitic Transformation during Hot Stamping of Complex Structure Auto Parts［J］. Journal of Materials Engineering & Performance, 2017, 26(4):1830-1838.
［39］王礼良，蔡昭恒，孙雨豪，等. 一种以数据为导向制造轻量化薄壁钣金零件的方法： CN 110465573A［P］. 2019-11-19.
WANG Liliang, CAI Zhaoheng, SUN Yuhao, et al. A Data-oriented Method for Manufacturing Lightweight Sheet Metal Parts:CN 110465573A［P］. 2019-11-19.
［40］NAKAGAWA Y , MORI K I , SUZUKIY , et al. Tailored Tempering without Die Heating in Hot Stamping of Ultra-high Strength Steel Parts［J］. Materials & Design, 2020, 192:108704-108715.
［41］HUA Lin, MENG Fanzhi, SONG Yanli, et al. A Constitutive Model of 6111-T4 Aluminum Alloy Sheet Based on the Warm Tensile Test［J］. Journal of Materials Engineering and Performance, 2014, 23(3):1107-1113.
［42］LAN Jian, SHEN Xuejun, LIU Juan, et al. Strengthening Mechanisms of 2A14 Aluminum Alloy with Cold Deformation Prior to Artificial Aging［J］. Materials Science and Engineering:A, 2019, 745:517-535.
［43］ZHOU Pu, SONG Yanli, HUA Lin, et al. Using Novel Strain Aging Kinetics Models to Determine the Effect of Solution Temperature on Critical Strain of Al-Zn-Mg-Cu Alloy［J］. Journal of Alloys and Compounds, 2020, 835:155647-155664.
［44］李欢欢. 7075铝合金车身构件快速热冲压形性演变规律及控制研究［D］. 武汉：武汉理工大学, 2020.
LI Huanhuan. Study on the Formability and Mechanical Properties Evolution and Control for PAHF of 7075 Aluminum Alloy Parts［D］. Wuhan：Wuhan University of Technology, 2020.
［45］ZHANG Wenpei, LI Huanhuan, HU Zhili, et al. Investigation on the Deformation Behavior and Post-formed Microstructure/Properties of AA7075-T6 Alloy under Pre-hardened Hot Forming Process［J］. Materials Science and Engineering A,2020, 792:139749-139760.
［46］LUAN X , ZHANG Q L , FAKIR O E , et al. Uniform:a Pilot Production Line for Hot/Warm Sheet Metal Forming Integrated in a Cloud Based SMARTFORMING Platform［C］∥ International Conference on Advanced High Strength Steel & Press Hardening. Xian, 2016, 492-497.
［47］WANG Ailing, ZHENG Yang, LIU Jun, et al. Knowledge Based Cloud FE Simulation a Multi-objective FEA System for Advanced FE Simulation of Hot Stamping Process［C］∥ International Conference & Workshop on Numerical Simulation of 3d Sheet Metal Forming Processes. Bristol, 2016, 426-430.
［48］WANG Liang, ZHU Bin, WANG Qiang, et al.Modeling of Hot Stamping Process Procedure Based on Finite State Machine(FSM)［J］. The International Journal of Advanced Manufacturing Technology, 2016, 89, 857-868.
［49］王梁,苏志同,安兴运,等.热冲压生产中的长周期智能控制［J］.锻压技术,2020,45(7):128-132.
WANG Liang, SU Zhitong, AN Xingyun, et al. Long-period Intelligent Control in Hot Stamping Production［J］. Forging & Stamping Technology, 2020,45(7):128-132.
［50］宋燕利,华林,戴定国.一种基于急动度的伺服冲压速度控制方法:CN 106739128A ［P］. 2017-05-31.
SONG Yanli, HUA Lin, DAI Dingguo. A Servo Speed Control Method Based on Jerk:CN 106739128A ［P］. 2017-05-31.
［51］戴定国. 高强铝合金车身构件伺服热冲压工艺与性能调控［D］. 武汉：武汉理工大学, 2018.
DAI Dingguo. Servo Hot Stamping Process and Property Regulation of High Strength Aluminum Alloy Automotive Parts［D］. Wuhan：Wuhan University of Technology, 2018.

[1]	ZHAO Yanjie, ZHANG Shuangjie, MU Zhenkai, WANG Wei, YAN Huajun, MA Shibo, ZHANG Yonghui. Numerical Simulation of Die Wear of Automobile Covering Parts Based on Dynamic Wear Model [J]. China Mechanical Engineering, 2024, 35(03): 515-523.
[2]	GAO Song, SUN Yingli, LI Qihan, YING Liang, HAO Zhaopeng, ZHANG Bangcheng. Multi-point 3D Hot Stretch-Bending Process of Titanium Alloy Profiles and Their Microstructure Evolution [J]. China Mechanical Engineering, 2023, 34(24): 2986-2995,3014.
[3]	HAN Fei, SUN Weilong, ZHANG Ruoqing. Study on the Influences of Bending Methods on Springback in Roll Forming Processes [J]. China Mechanical Engineering, 2023, 34(19): 2353-2361.
[4]	LIU Heng, WANG Zhineng, BIN Guangfu, LIN Weiming, LIN Yaochen, MA Yanxiang. Theoretical Wrinkling Modeling and Critical Forming Radius Analysis of Aviation Tube Bending Forming Considering Circumferential Waveform Characteristics [J]. China Mechanical Engineering, 2023, 34(16): 1982-1990.
[5]	XING Menglong, DU Fengshan, FU Yutao. Analysis and Experimental Verification of Corner Filling Degree of Rectangular Tube Roll Forming [J]. China Mechanical Engineering, 2023, 34(07): 866-874.
[6]	CHEN Zhongbao, HAN Xinghui, ZHUANG Wuhao, HU Yaxiong, CHEN Mingzhang, . Forming Law of Multi-degree-of-freedom Rotary Forging for High-rib Thin-plate Components and Process Planning [J]. China Mechanical Engineering, 2023, 34(04): 464-474.
[7]	ZHANG Lijun, YANG Ning, LI Zhishun, TAO Jishao, XU Jiayi, LI Fan, ZHAO Shengdun, . Progresses and Applications of Counter-roller Spinning Technology for Metal Thin-walled Cylinders [J]. China Mechanical Engineering, 2023, 34(02): 226-237.
[8]	AI Qingbo, ZHANG Jie, CHENG Hui, LYU Youlong, ZUO Liling, HU Lan. Analysis for Roll-bending Forming Quality of Spaceflight Thin-walled Cylindrical Workpieces Based on PointCPP-LSF Method#br# [J]. China Mechanical Engineering, 2022, 33(08): 977-985.
[9]	LI Qihan, XU Chuanwei, GAO Song, HAN Xiaoheng, ZHAO Qingming, GU Dongwei, MA Fenglei. Clinching Test for High Strength Steel-Aluminum Alloy Dissimilar Material Sheets#br# [J]. China Mechanical Engineering, 2021, 32(15): 1861-1867.
[10]	HU Jian1;CHEN Zezhong1;LIU Tao2;YANG Jinhua3. Simulation and Tests on Hot Forming Process Optimization for Door Anti-collision Beams [J]. China Mechanical Engineering, 2021, 32(01): 92-100.
[11]	ZHAN Mei, LEI Yudong, , ZHENG Zebang, . Status and Development Tendency of Integrated Computational Materials Engineering in Precision Plastic Forming [J]. China Mechanical Engineering, 2020, 31(22): 2663-2677.
[12]	LI Ming, DAI Peipei, CHANG Zhidong, CHEN Jun, . Springback Control and Compensation of Incremental Forming for Sheet Metal Parts with Open Geometric Feature [J]. China Mechanical Engineering, 2020, 31(22): 2723-2727.
[13]	YANG Jun1;YANG Yunsong1;LI Wei1;XIAO Yunya2;ZHOU Zhixiong1. Theoretical Analyses and Experimental Studies for Riveting and Assembly Processes of Automotive Hub Bearing Units [J]. China Mechanical Engineering, 2017, 28(24): 2949-2956.
[14]	BI Jiang, , ZHAO Changcai, DU Bing, CHEN Xiaohua, DONG Guojiang. Research on Bulging Technology of AA6061 Aluminum Alloy Tubes with Square Cross Sections [J]. China Mechanical Engineering, 2017, 28(12): 1491-1498.
[15]	XUE Kemin, SUN Dazhi, LI Ping, GONG Zitianzong. Hot Stamping Forming Processes and Experiments of 22MnB5 Ultra-high Strength Steels [J]. China Mechanical Engineering, 2017, 28(12): 1498-1503,1511.