Collaboration of Cloud Manufacturing Service Based on Service Choreography

doi:10.3969/j.issn.1004-132X.2021.07.012

Abstract

Abstract: The value creation of manufacturing products was evolved to cross-organizational collaboration, and the service-based orchestration such as business process execution language was difficult to meet multi-agent, diverse and dynamic flow management of service composition. A service choreography method was proposed to predefine and implement the collaborative flow of cloud manufacturing service based on WS-CDL protocol. By designing the interface specification for interacting information and extending WS-CDL protocol, the standardized description of the service collaboration was achieved to promote communication of cross-organizational services. A case study was given to illustrate that the service collaboration may improve the efficiency of service execution and the resource utilization rate of service providers.

Key words: cloud manufacturing, web service choreography description language(WS-CDL), service choreography, interface specification

摘要： 制造产品价值创造已演变为跨组织的协同，基于业务流程执行语言等服务编制的方法难以应对多主体、多样化和动态化的服务组合流程管理需求。提出了一种基于WS-CDL的云制造服务编排方法，对云制造服务协同流程进行预先定义并在执行过程中遵照执行。通过设计信息交互接口规范和扩展WS-CDL协议，实现云制造服务协同的标准化描述，促进跨组织服务之间的有效沟通。通过仿真对比验证了服务协同方法能改善服务执行效率，提高服务供应商的资源利用率。

关键词: 云制造, Web服务编排描述语言（WS-CDL）, 服务编排, 接口规范

CLC Number:

TB49

LU Jianfeng, HAN Tiaojuan, YU Yaoping. Collaboration of Cloud Manufacturing Service Based on Service Choreography[J]. China Mechanical Engineering, 2021, 32(07): 849-859.

陆剑峰, 韩调娟, 俞耀平. 基于服务编排的云制造服务协同[J]. 中国机械工程, 2021, 32(07): 849-859.

References

［1］台德艺, 徐福缘, 胡伟. 云制造合作思想与实现［J］. 计算机集成制造系统, 2012, 18(7):1575-1583.
TAI Deyi, XU Fuyuan, HU Wei. Cloud Manufacturing Cooperation Ideal and Implementation［J］. Computer Integrated Manufacturing System, 2012, 18(7):1575-1583.
［2］杨男,李东波,童一飞. 云制造环境下基于动态描述逻辑的制造服务匹配研究［J］. 中国机械工程, 2013, 24(16):2202-2207.
YANG Nan, LI Dongbo, TONG Yifei. Research on Manufacturing Service Match Based on Dynamic Description Logic in Cloud Manufacturing Environment ［J］. China Mechanical Engineering, 2013, 24 (16):2202-2207.
［3］李伯虎, 张霖, 任磊，等. 再论云制造［J］. 计算机集成制造系统, 2011, 17(3):449-457.
LI Bohu, ZHANG Lin, REN Lei, et al. Further Discussion on Cloud Manufacturing ［J］. Computer Integrated Manufacturing System, 2011, 17 (3):449-457.
［4］刘永奎, 王力翚, 王曦，等. 云制造再探讨［J］. 中国机械工程, 2018, 29(18):2226-2237.
LIU Yongkui, WANG Lihui, WANG Xi, et al. Re-exploration of Cloud Manufacturing ［J］. China Mechanical Engineering, 2018, 29 (18):2226-2237.
［5］GROOVER M P. 自动化、生产系统与计算机集成制造［M］. 3版. 北京：清华大学出版社， 2011:6-8.
GROOVER M P. Automation, Production Systems, and Computer-integrated Manufacturing［M］.3rd ed. Beijing:Tsinghua University Press, 2011:6-8.
［6］李强, 史志强, 邵长锋. 面向个性化定制的云制造服务平台的研发［J］. 电子技术应用, 2016(5):109-112.
LI Qiang, SHI Zhiqiang, SHAO Changfeng. Research and Development of Cloud Manufacturing Service Platform for Individual Customization［J］. Application of Electronic Technology, 2016 (5):109-112.
［7］CHITUC C M, NOF S Y. The Join/Leave/Remain (JLR) Decision in Collaborative Networked Organizations［J］. Computers & Industrial Engineering, 2007, 53(1):173-195.
［8］李京生, 王爱民, 唐承统, 等. 基于动态资源能力服务的分布式协同调度技术［J］. 计算机集成制造系统, 2012，18(7):222-233.
LI Jingsheng, WANG Aimin, TANG Chengtong, et al. Distributed Collaborative Scheduling Technology for Service Based on Dynamic Resource Capability［J］. Computer Integrated Manufacturing Systems, 2012 ,18(7):222-233.
［9］ZHANG Wenyu, ZHANG Shuai, GUO Shanshan,et al. Concurrent Optimal Allocation of Distributed Manufacturing Resources Using Extended Teaching-Learning-based Optimization［J］. International Journal of Production Research, 2017,55(3):718-735.
［10］谭伟, 刘璇, 徐钦桂. 服务环境下多粒度制造资源自适应组织与发现［J］. 计算机集成制造系统, 2014, 20(9):2284-2296.
TAN Wei, LIU Xuan, XU Qingui. Adaptive Organization and Discovery of Multi-granularity Manufacturing Resources under Service Environment ［J］. Computer Integrated Manufacturing System, 2014, 20(9):2284-2296.
［11］李益兵, 宋东林, 王磊. 基于混沌遗传算法的集团分布式制造工序资源配置［J］. 控制与决策, 2019, 34(6):60-68.
LI Yibing, SONG Donglin, WANG Lei. Resource Allocation of Group Distributed Manufacturing Process Based on Chaotic Genetic Algorithm［J］. Control and Decision, 2019, 34 (6):60-68.
［12］姜久雷. 云计算环境下跨组织业务流程建模方法研究［D］. 上海:东华大学, 2013.
JIANG Jiulei. Research on Modeling Method for Cross-organizational Business Process in Cloud Computing［D］. Shanghai:Donghua University, 2013.
［13］OLIVER K, LEYMANN F. Choreography Design Using WS-BPEL［J］. Bulletin of the IEEE Computer Society Technical Committee on Data Engineering, 2008(3):1-4.
［14］尤殿龙. 面向服务编排的大粒度Web服务组合演化方法及关键技术研究［D］. 秦皇岛:燕山大学, 2014.
YOU Dianlong. Research on Composition Evolution Methods and Key Technologies for Large-granularity Web Service of Service-oriented choreography［D］. Qinhuangdao:Yanshan University, 2014.
［15］李健. 多粒度Web服务聚合与协同方法研究［D］. 济南:山东大学, 2012.
LI Jian. Research on Multi-granularity Web Services Aggregation and Collaboration［D］. Jinan:Shandong University, 2012.
［16］薛霄, 刘志中, 黄必清. 服务质量可定制的企业协同Web服务组合方法［J］. 计算机集成制造系统, 2013, 19(11):2911-2921.
XUE Xiao, LIU Zhizhong, HUANG Biqing. Composition Method for Web Service with Customizable Service Quality for Enterprise Collaborative［J］. Computer Integrated Manufacturing System, 2013, 19 (11):2911-2921.
［17］WEI Chunmei, ZHANG Chenglei, SONG Tingxin, et al. A Cloud Manufacturing Service Management Model and Its Implementation［C］∥International Conference on Service Sciences. Shenzhen, 2013:60-63.
［18］郑姜. 基于WS-CDL的贸易协同流程建模工具［D］. 上海：华东理工大学，2011.
ZHENG Jiang. Modeling Tool of Trade Collaborative Process Based on WS-CDL［D］. Shanghai:East China University of Technology, 2011.

[1]	LI Yang, GUO Fei, LI Maoyuan, ZHANG Yun, LI Dequn. Intelligent Technology of Plastic Injection Molding and Its Applications [J]. China Mechanical Engineering, 2020, 31(22): 2734-2744.
[2]	LI Qiang, RU Ke, LIU Jiliang, ZHANG Ke. Interactive Cloud Manufacturing Mode for Mass Personalization [J]. China Mechanical Engineering, 2020, 31(07): 788-796.
[3]	HE Zheng;ZHANG Zhizhao;LI Bo. Evolutionary Game Model of Knowledge Transfer Incentive in Cloud Manufacturing Supply Chains [J]. China Mechanical Engineering, 2020, 31(06): 695-705.
[4]	GONG Xiaorong, LI Xiaobin, YIN Chao. Optimization Decision Method of Machine Tool Resources Based on Bayesian Network under Cloud Manufacturing Environments [J]. China Mechanical Engineering, 2018, 29(20): 2438-2445.
[5]	HE Wei, JIA Guozhu, KONG Jili, ZONG Hengshan. Sustainability-based Multi-task Scheduling in Cloud Manufacturing [J]. China Mechanical Engineering, 2018, 29(18): 2215-2225.
[6]	LIU Yongkui, WANG Lihui, WANG Xi Vincent, XU Xun. A Revisit to Cloud Manufacturing [J]. China Mechanical Engineering, 2018, 29(18): 2226-2237.
[7]	DONG Yuanfa;WU Zhengjia;DU Xuan;ZHA Jing;YUAN Qingsong. Resource Abnormal Management Method of Unsteady Processes of Cloud Manufacturing Services [J]. China Mechanical Engineering, 2018, 29(10): 1193-1200.
[8]	LIU Mingzhou, WANG Qiang, LING Lin. Cloud Manufacturing Task Decomposition Method Based on HTN [J]. China Mechanical Engineering, 2017, 28(08): 924-930.
[9]	LU Jiansha, HU Qinghui, DONG Qiaoying, TANG Hongtao. Cloud Manufacturing-oriented Mixed-model Hybrid Shop-Scheduling Problem [J]. China Mechanical Engineering, 2017, 28(02): 191-198,205.
[10]	Tang Huamao, Guo Gang. Virtualization Descriptions and Integrated Intelligent Service Model of Cloud Manufacturing Resources [J]. China Mechanical Engineering, 2016, 27(16): 2172-2178.
[11]	Liu Bo, Zhang Zili. Framework of Complex Task Oriented Service Composition and Optimization in Cloud Manufacturing Systems [J]. China Mechanical Engineering, 2015, 26(8): 1048-1057.
[12]	Tan Mingzhi, Yi Shuping, Zeng Rui. A Comprehensive Trust Evaluation Model for Cloud Manufacturing Service Based on Service Satisfaction [J]. China Mechanical Engineering, 2015, 26(18): 2473-2480.
[13]	Ma Jun, Luo Guofu, Lu Di, Guo Yanqiang. Research on Manufacturing Resource Cloud Integration Meta Modeling and Cloud-Agent Service Scheduling [J]. China Mechanical Engineering, 2014, 25(7): 917-923,930.
[14]	Shen Lei, Guo Gang, Dong Yuanfa, Luo Yu. Equipment Manufacturing Industry-oriented Respond Model of Cloud Manufacturing Service Requirements and Resources [J]. China Mechanical Engineering, 2014, 25(7): 911-917.
[15]	Shang Xin, Yin Guofu. Analysis and Optimization of Configuration Path for Customized Manufacturing System Based on Dynamic Cloud Manufacturing [J]. China Mechanical Engineering, 2014, 25(7): 906-910.