Novel NFTSM Control for Servo Systems

doi:10.3969/j.issn.1004-132X.2022.04.005

Abstract

Abstract: The shipborne servo system featured friction and intricate disturbances， which needed to improve control precision and robustness. A NFTSM control method was proposed with phase compensation（NFTSM+ARBF+TTD）. Taylors formula-based tracking differentiator（TTD）was innovated with Taylors formula and nonlinear function fhan. The proposed method could compensate phase delay and acquire desired control command， also suppress noises. By using ARBF to approach the disturbance， the chattering problem in NFTSM could be solved effectively. Experimental results show that adaptive radial basis function（ARBF） may suppress the differential peaks and estimate disturbance accurately and effectively. Semi-physical simulation experiments were conducted to tracking sinusoidal reference. The results show that compared with traditional NFTSM， the tracking errors are reduced twice time by NFTSM+ARBF+TTD method. Experimental results show the proposed method may be applied to shipborne rocket launcher AC servo systems.

Key words: servo system, tracking differentiator, disturbance compensation, non-singular fast terminal sliding mode（NFTSM）

摘要： 鉴于某舰载随动系统存在摩擦、海况等扰动因素，为提升系统控制精度及鲁棒性，提出了一种基于相位补偿的非奇异快速终端滑模控制（NFTSM+ARBF+TTD）方法。将泰勒公式与非线性函数fhan相结合，构造跟踪微分器，旨在减小相位延迟。在抑制微分过程噪声的基础上，应用泰勒公式进行相位补偿。设计自适应神经网络（ARBF）逼近扰动项，减小了非奇异快速终端滑模（NFTSM）中的抖振。扰动估计结果表明，与RBF相比，应用ARBF逼近扰动能够有效抑制微分峰值，更接近扰动真实值。半实物仿真实验中，正弦跟踪结果表明NFTSM+ARBF控制策略的跟踪误差比NFTSM减小一半左右，具备良好动态跟踪性能，适用于该交流伺服系统。

关键词: 随动系统, 微分跟踪器, 扰动补偿, 非奇异快速终端滑模

CLC Number:

TP249

SHI Difen, HOU Runmin, GU Xiaohui, HOU Yuanlong. Novel NFTSM Control for Servo Systems[J]. China Mechanical Engineering, 2022, 33(04): 413-420.

史蒂芬, 侯润民, 顾晓辉, 侯远龙. 随动系统的新型非奇异快速终端滑模控制[J]. 中国机械工程, 2022, 33(04): 413-420.

References

［1］ZHAO L， XIA Y， YANG Y， et al. Multi-controller Positioning Strategy for a Pneumatic Servo System via Pressure Feedback［J］. IEEE Transactions on Industrial Electronics， 2017， 64（6）：4800-4809.
［2］YANG T， SUN N， CHEN H， et al. Neural Network-based Adaptive Anti Swing Control of an under Actuated Ship-mounted Crane with Roll Motions and Input Dead Zones［J］. IEEE Transactions on Neural Networks， 2020， 31（3）：901-914.
［3］ZHANG X， SUN L， ZHAO K， et al. Nonlinear Speed Control for PMSM System Using Sliding-mode Control and Disturbance Compensation Techniques［J］. IEEE Transactions on Power Electron， 2013， 28（3）：1358-1365.
［4］吕明明，侯润民，柯于峰，等. 光电跟踪平台脱靶量滞后补偿方法［J］. 西安交通大学学报， 2019， 53（11）：141-147.
LYU Mingming， HOU Runmin， KE Yufeng， et al. Compensation Method for Miss Distance Time-delay of Electro-optical Tracking Platform［J］. Journal of Xian Jiaotong University， 2019， 53（11）：141-147.
［5］FENG J P， WANG W， CHEN Y. An Improved Tracking-differentiator Filter Based on Taylors Formula［J］. Optik-International Journal for Light and Electron Optics， 2018， 158：1026-1033.
［6］HAN Y X， CHENG Y， XU G. Trajectory Tracking Control of AGV Based on Sliding Mode Control with the Improved Reaching Law［J］. IEEE Access， 2019， 7：20748-20755.
［7］LIANG Y W， XU S D， LIAW D C. A Study of T-S Model-based SMC Scheme with Application to Robot Control［J］. IEEE Transactions on Industrial Electronics， 2008， 55（11）：3964-3971.
［8］XU S S， CHEN C， WU Z， et al. Study of Nonsingular Fast Terminal Sliding-mode Fault-tolerant Control［J］. IEEE Transactions on Industrial Electronics， 2015， 62（6）：3906-3913.
［9］SHAO K， ZHENG J， HUANG K， et al. Finite-time Control of a Linear Motor Positioner Using Adaptive Recursive Terminal Sliding Mode［J］. IEEE Transactions on Industrial Electronics， 2019， 67（8）：6659-6668.
［10］张雨恒，刘宗凯，周本谋，等. 卡尔曼滤波补偿在潜载光电跟瞄中的应用［J］. 火力与指挥控制， 2021， 46（1）：112-116.
ZHANG Yuheng， LIU Zongkai， ZHOU Benmou， et al. The Application of Kalman Filtering in Submarine Photoelectric Tracking and Aiming［J］. Fire Control & Command Control， 2021， 46（1）：112-116.
［11］缪仲翠，王志浩，李东亮，等. 基于 FOSM-MRAS 观测器的永磁同步电机MPTC 系统［J］. 电机与控制学报， 2020， 24（4）：121-130.
MIAO Zhongcui， WANG Zhihao， LI Dongliang， et al. Permanent Magnet Synchronous Motor MPTC System Based on FOSM-MRAS Observer［J］. Electric Machines and Control， 2020， 24（4）：121-130.
［12］ZHANG T， XU Z， LI J， et al. A Third-order Super-twisting Extended State Observer for Dynamic Performance Enhancement of Sensorless IPMSM Drives［J］. IEEE Transactions on Industrial Electronics， 2019， 67（7）：5948-5958.
［13］MOHAMED I S， ROVETTA S， DO T D， et al. A Neural-network-based Model Predictive Control of Three-phase Inverter with an Output LC Filter［J］. IEEE Access， 2019， 7：124737-124749.
［14］CHAOUI H， KHAYAMY M， OKOYE O. Adaptive RBF Network Based Direct Voltage Control for Interior PMSM Based Vehicles［J］. IEEE Transactions on Vehicular Technology， 2018， 67（7）：5740-5749.
［15］LIANG X， LI S， FEI J， et al. Adaptive Fuzzy Global Fast Terminal Sliding Mode Control for Micro Gyroscope System［J］. IEEE Access， 2016， 4：9681-9688.
［16］ZHAO X， FU D. Adaptive Neural Network Nonsingular Fast Terminal Sliding Mode Control for Permanent Magnet Linear Synchronous Motor［J］. IEEE Access， 2019， 7：180361-180372.
［17］韩京清，王伟. 非线性跟踪——微分器［J］. 系统科学与数学， 1994，14（2）：177-183.
HAN Jinqing， WANG Wei. Nonlinear Tracking—Differentiators［J］. Journal of Systems Science and Mathematical， 1994， 14（2）：177-183.
［18］刘春强，骆光照，涂文聪，等．基于自抗扰控制的双环伺服系统［J］. 中国电机工程学报， 2017， 37（23）：7032-7039.
LIU Chunqiang， LUO Guangzhao， TU Wencong， et al. Systems with Double Closed-loops Based on Active Disturbance Rejection Controllers［J］. Proceedinds of the CSEE， 2017， 37（23）：7032-7039.
［19］FENG H， LI S. A Tracking Differentiator Based on Taylor Expansion［J］. Applied Mathematics Letters， 2013， 26（7）：735-740.
［20］HAIMO V T. Finite Time Differential Equations［C］∥Proceedings of 24th Conference on Decision and Control. Fort Lauderdale， 1985：1729-1733.
［21］XU W， JUNEJO A K， LIU Y， et al. Improved Continuous Fast Terminal Sliding Mode Control with Extended State Observer for Speed Regulation of PMSM Drive System［J］. IEEE Transactions on Vehicular Technology， 2019， 68（11）：10465-10476.

[1]	TUN Jian, Jocher Dietrich, LI Jiang. Research on Sheet Metal Digital Incremental Forming Technology without Support [J]. J4, 201016, 21(16): 2002-2005,2015.
[2]	CHEN Hao, GONG Mingde, ZHAO Dingxuan, ZHANG Wei, ZHANG Yue, HAO Chunyou, . Sensitivity Analysis and Adaptive Tracking Control of Electro-hydraulic Active Suspensions [J]. China Mechanical Engineering, 2023, 34(04): 481-489.
[3]	DONG Zhenle, YANG Yinghao, YAO Jianyong, ZHANG Zheng, LI Geqiang, WANG Shuai. Asymptotic Prescribed Performance Tracking Control of Electro-hydraulic Servo Systems under Matched and Unmatched Disturbances [J]. China Mechanical Engineering, 2022, 33(20): 2437-2443.
[4]	QIN Yanming;ZHAO Jingyi;MA Jinyu;WANG Jianjun. Trajectory Tracking Control of Eight-DOF Manipulators [J]. China Mechanical Engineering, 2019, 30(22): 2741-2747,2756.
[5]	WANG Ronglin1;LU Baochun1;HOU Runmin1;GAO Qiang1;ZHANG Wei2;ZHU Yun3;DAI Lian3. FOPID Improved ADRC in AC Servo Systems [J]. China Mechanical Engineering, 2019, 30(16): 1989-1995.
[6]	Huang Kang, Gong Miao, Zhong Huayong, Wang Kailai. Control Strategy of Multipoint Jacking System Based on Generalized Predictive Adjacent Coupling Theory [J]. China Mechanical Engineering, 2016, 27(15): 2009-2014.
[7]	Dong Zhenle, Ma Dawei, Yao Jianyong, Wang Xiaofeng. Prescribed Performance Tracking Control of Electro-hydraulic Servo Systems with Hysteresis Compensation [J]. China Mechanical Engineering, 2016, 27(08): 995-1000.
[8]	Zhu Yong, Jiang Wanlu, Liu Siyuan, Zheng Zhi, . Research on Influences of Nonlinear Hydraulic Spring Force on Nonlinear Dynamic Behaviors of Electro-hydraulic Servo System [J]. China Mechanical Engineering, 2015, 26(8): 1085-1091,1104.
[9]	Zeng Zhilin, Xu Guohua, Xu Bing, Zhao Chuncheng. Research on High-precision Positioning System of an Underwater Platform [J]. China Mechanical Engineering, 2014, 25(8): 1021-1027.
[10]	Huang Keyuan, Zhou Taotao, Huang Shoudao, Huang Qing. CNC Position Servo System with Feedforward Compensation and Differential Feedback [J]. China Mechanical Engineering, 2014, 25(15): 2017-2023.
[11]	Chen Dongning, Zhang Guofeng, Yao Chengyu, Zhang Ruixing, . Bacterial Swarm Foraging Optimization Algorithm and Its Application in Optimization of PID Parameters [J]. China Mechanical Engineering, 2014, 25(1): 59-64.
[12]	LONG Man-Lin-1, 2, FU Yong-Ling-1, LI Guang-Hua-2, CHEN Shuang-Qiao-2. ADR Algorithm Applied in Servo System Driven by DC Torque Motor [J]. China Mechanical Engineering, 2012, 23(9): 1047-1050.
[13]	HONG Mu-Lan-1, 2, ZHANG Chong-Wei-1, LIN Jian-2, BO Chao-3. Development of an Experimental Platform for Linear Motors in CNC Machine Tools [J]. China Mechanical Engineering, 2012, 23(3): 274-278.
[14]	LI Bei, YAN Jun, CENG Yong-Hua, GUO Gang. #br# Investigation of Nonlinear Dynamic Characteristics for Servo System of a Hydraulic Excavator Arm [J]. China Mechanical Engineering, 2012, 23(15): 1807-1810.
[15]	LIU Qing, WANG Ta-Yong, DONG Jing-Chuan, LIU Qing-Jian, LI BO. #br# PMSM Sensor-less Position Controller Based on ESO and NTD [J]. China Mechanical Engineering, 2012, 23(10): 1212-1215.