Energy Consumption Distribution Characteristics and Prediction Model of High-speed Dry Gear Hobbing Machine

doi:10.3969/j.issn.1004-132X.2022.07.011

Abstract

Abstract: Aiming at the energy consumption optimization of high-speed dry gear hobbing machines, energy consumption distribution characteristics and prediction model of machine tool under variable processing parameters were explored herein. Firstly, taking energy consumption components of the machine tool as the research object, a power model of high-speed dry gear hobbing machine was established. Then, based on the circuit distribution principle of machine tools, the model was analyzed and verified through gear hobbing experiments, and the relationship between variable processing parameters and power and energy consumption of different parts of the machine tool was revealed. Finally, the energy consumption prediction model of high-speed dry gear hobbing machine was constructed.

Key words: high-speed dry gear hobbing, machine tool energy consumption, distribution characteristic, prediction model, processing parameter

摘要： 针对高速干切滚齿机床的能耗优化问题，对变工艺参数下的机床能耗分布特性及其预测模型进行了研究。首先，以机床能耗元件为研究对象，建立了高速干切滚齿机床功率模型；然后，基于机床电路分布原理，通过滚齿实验对所建模型进行了分析验证，揭示了变工艺参数与机床不同部位的功率和能耗之间的关系；最后，构建了高速干切滚齿机床能耗预测模型。

关键词: 高速干切滚齿, 机床能耗, 分布特性, 预测模型, 工艺参数

CLC Number:

TH16

NI Hengxin, YAN Chunping, SUN Han, XU Teng, HUANG Yigong, ZHOU Chao. Energy Consumption Distribution Characteristics and Prediction Model of High-speed Dry Gear Hobbing Machine[J]. China Mechanical Engineering, 2022, 33(07): 842-851.

倪恒欣, 阎春平, 孙菡, 徐腾, 黄一躬, 周超. 高速干切滚齿机床能耗分布特性及其预测模型[J]. 中国机械工程, 2022, 33(07): 842-851.

References

［1］李钧亮，王时龙，王四宝，等.基于工件材料去除率的滚齿机床能耗模型［J］.中国机械工程，2020，31(21)：2626-2631.
LI Junliang，WANG Shilong，WANG Sibao，et al. Research on Energy Consumption Model of Hobbing Machines Based on Workpiece Material Removal Rate［J］. China Mechanical Engineering，2020，31(21)：2626-2631.
［2］徐兴硕，李方义，孔维森，等. 基于Vericut的机床能耗建模与仿真［J］.中国机械工程，2018，29(21)：2533-2538.
XU Xingshuo，LI Fangyi，KONG Weisen，et al. Modeling and Simulation of Machine Tool Energy Consumption Based on Vericut［J］. China Mechanical Engineering，2018，29(21)：2533-2538.
［3］谢俊，刘飞，蔡维. 机床服役过程能量效率的可预测特性及预测方法研究［J］.机械工程学报，2019，55(17)：172-184.
XIE Jun，LIU Fei，CAI Wei. Study on the Predictable Characteristics and Prediction Methods of Energy Efficiency during Machine Tool Service［J］. Journal of Mechanical Engineering，2019，55(17)：172-184.
［4］庹军波，刘飞，张华，等. 机床固有能量效率的内涵及其评价方法［J］.机械工程学报，2018，54(7)：167-175.
TUO Junbo，LIU Fei，ZHANG Hua，et al. Connotation and Assessment Method for Inherent Energy Efficiency of Machine Tools［J］. Journal of Mechanical Engineering，2018，54(7)：167-175.
［5］CAI W，LIU F，HU S. An Analytical Investigation on Energy Efficiency of High-speed Dry-cutting CNC Hobbing Machines［J］. International Journal of Sustainable Engineering，2018，11：412-419.
［6］WANG L，RAN X，LI Y，et al. Energy Consumption Model of Plasma Spraying Based on Unit Process Life Cycle Inventory［J］. Journal of Materials Research and Technology，2020，9(6)：15324-15334.
［7］ZHAO G，ZHAO Y，MENG F，et al. Prediction Model of Machine Tool Energy Consumption in Hard-to-process Materials Turning［J］. International Journal of Advanced Manufacturing Technology，2020，106：4499-4508.
［8］AKKU瘙塁 H，YAKA H. Experimental and Statistical Investigation of the Effect of Cutting Parameters on Surface Roughness, Vibration and Energy Consumption in Machining of Titanium 6Al-4V Eli(Grade 5) Alloy［J］. Measurement，2021，167：108465.
［9］SIHAG N，SANGWAN K S. A Systematic Literature Review on Machine Tool Energy Consumption［J］. Journal of Cleaner Production，2020，275：123125.
［10］NI H，YAN C，CAO W，et al. A Novel Parameter Decision Approach in Hobbing Process for Minimizing Carbon Footprint and Processing Time［J］. International Journal of Advanced Manufacturing Technology，2020，111:3405-3419.
［11］倪恒欣，阎春平，陈建霖，等. 高速干切滚齿工艺参数的多目标优化与决策方法［J］. 中国机械工程，2021，32(7)：832-838.
NI Hengxin，YAN Chunping，CHEN Jianlin，et al. Multi-objective Optimization and Decision-Making Method of High Speed Dry Hobbing Process Parameters［J］.China Mechanical Engineering，2021，32(7)：832-838.
［12］ISO. ISO 14955-1：2017(E) Machine Tools E Environmental Evaluation of Machine Tools—Part 1：Design Methodology for Energy-Efficient Machine Tools［S］. Geneva：ISO， 2017.
［13］WANG Q，LIU F，WANG X. Multi-objective Optimization of Machining Parameters Considering Energy Consumption［J］. The International Journal of Advanced Manufacturing Technology，2014，71(5/8)：1133-1142.
［14］刘兴旺，马小礼，刘振全，等. 涡旋压缩机型线几何参数的优化设计方法研究［J］.流体机械，2005(11)：53-56.
LIU Xingwang，MA Xiaoli，LIU Zhenquan，et al. A Kind of Vortex Type Line Geometry Parameter Optimization Method［J］. Fluid Machinery，2005(11)：53-56.
［15］路甬祥. 液压气动技术手册［M］.北京：机械工业出版，2002.
LU Yongxiang. Hydraulic and Pneumatic Technical Manual［M］. Beijing：Machinery Industry Press，2002.

[1]	ZHANG Jinyang, XU Weichun, WANG Xiaohan, JIANG Xiaohui, GAO Shan. Study on Influences of Milling Process Optimization on Residual Stress Distribution for Machining Nickel-based Superalloys [J]. China Mechanical Engineering, 2024, 35(04): 624-635.
[2]	WEN Zhiwei, LOU Junqiang, CHEN Tehuan, CUI Yuguo, WEI Yanding, LI Guoping. Vibration Mimicking Fish Body Wave and Flow Distribution of Underwater Flexible Structure with Resonant Actuation of Macro Fiber Composites [J]. China Mechanical Engineering, 2024, 35(03): 405-413.
[3]	ZHA Xuming, YUAN Zhi, QIN Hao, XI Linqing, ZHANG Tao, JIANG Feng. Ultrasonic Impact Strengthening of Titanium Alloys：State-of-the-art and Prospectives [J]. China Mechanical Engineering, 2023, 34(19): 2269-2287.
[4]	CHENG Jibin, DAI Ning, GUO Pei, XIONG Jiyuan, YE Shiwei, CHENG Xiaosheng. Design Techniques of Soft Robot Arms Based on Mechanics Metamaterials [J]. China Mechanical Engineering, 2023, 34(16): 1900-1906.
[5]	XIANG Routong, WANG Shilong, ZHOU Jie, YI Lili. Study on Pressure Response Characteristics of New Pneumatic Position Sensor under Irradiation Environments [J]. China Mechanical Engineering, 2023, 34(11): 1364-1371.
[6]	DUAN Lingyun, HUANG Chuanzhen, LIU Dun, YAO Peng, LIU Hanlian. An Experimental Investigation of Laser Assisted Waterjet Microgrooving of GaAs Wafers [J]. China Mechanical Engineering, 2023, 34(10): 1172-1183.
[7]	LI Guolong, ZHU Guohua, JIANG Lin, TAO Yijie, JIA Yachao. Optimization of Multi-objective Grinding Process Parameters to Suppress Chatter Marks [J]. China Mechanical Engineering, 2023, 34(09): 1086-1092.
[8]	CHEN Geng, XIANG Hua, YE HanXIAO Fei. Research on Robot Abrasive Belt Grinding Parameters Considering the Change of Normal Contact Force [J]. China Mechanical Engineering, 2023, 34(07): 803-811，820.
[9]	HAN Jiang, LI Zhenfu, TIAN Xiaoqing, FEI Ningzhong, XIA Lian, . Research on Prediction and Control Method of Workpiece Tooth Flank Texture during Internal Gear Power Honing [J]. China Mechanical Engineering, 2023, 34(01): 10-16.
[10]	ZHANG Jun, WANG Wen, WANG Jian, JIN Taotao, TIAN Zhipeng. Simulation Analysis of Temperature Fields and Parameter Optimization of Stationary Shoulder Friction Stir Welding [J]. China Mechanical Engineering, 2022, 33(17): 2115-2124.
[11]	ZHANG Jin, HAN Fuzhu, . Establishment and Research of Prediction Model of Discharge Gap Voltages in Discharge Arc Milling [J]. China Mechanical Engineering, 2022, 33(16): 1891-1896.
[12]	YI Qian, LI Congbo, PAN Jian, ZHANG You. Reliability Analysis of Machining Accuracy and Processing Parameter Optimization for Thin-plate Parts [J]. China Mechanical Engineering, 2022, 33(11): 1269-1277.
[13]	QIAN Yingping, XUE Hang, MEI Jianliang. Research on On-line Quality Monitoring Method for Injection Molding Products of Crystalline Plastic [J]. China Mechanical Engineering, 2022, 33(09): 1073-1076,1083.
[14]	ZHANG Wei, MA Kaiqi, JIN Guoqing, . Experimental Study of Embedded 3D Printing PDMS Materials for Soft Robots [J]. China Mechanical Engineering, 2021, 32(19): 2357-2366.
[15]	WEN Donghui, XU Xinqi, ZHENG Zijun. Research on Shear Characteristics of LHP Flow Fields [J]. China Mechanical Engineering, 2021, 32(18): 2203-2210，2216.