Environmental Adaptability and Tribological Properties of MoS2/WS2 Composite Films

doi:10.3969/j.issn.1004-132X.2022.12.008

Abstract

Abstract: The hot and humid atmosphere had a serious deteriorating effect on the tribological properties of the MoS2 lubricating films. Unbalanced magnetron sputtering technology was successfully used to prepare WS2 doped MoS2 composite films, and the addition of a small amount of WS2 in the MoS2 matrix might induce the preferential growth of MoS2 along the(002) crystal planes, the film structure became denser, the penetration and diffusion of corrosive media were significantly inhibited, and the MoS2/WS2 composite film exhibited high salt spray corrosion resistance, low friction coefficient and wear rate. The composition-optimized MoS2-1.6at.%WS2 composite film was only oxidized on the surface layers after 4 days of salt spray, and still maintained a low friction coefficient of 0.16 and a low wear rate of 3.80×10-6 mm3/(N·m).

Key words: , MoS2/WS2 composite film, salt spray environment, corrosion resistance, tribological property

摘要： 湿热大气环境对MoS2润滑薄膜的摩擦学性能有严重的劣化作用。采用非平衡磁控溅射技术成功制备了WS2掺杂MoS2复合薄膜，研究发现，MoS2基体中掺入少量WS2可以诱导MoS2沿（002）晶面择优生长，薄膜结构变得更加致密，显著抑制腐蚀介质的渗透和扩散，使MoS2/WS2复合薄膜展现出高盐雾耐蚀性、小摩擦因数和低磨损率。成分优化的MoS2-1.6%WS2（原子分数）复合薄膜在经历4天的盐雾试验后仅表层被氧化，仍能保持0.16的小摩擦因数和3.80 × 10-6 mm3/（N·m）的低磨损率。

关键词: MoS2/WS2复合薄膜, 盐雾环境, 耐腐蚀性, 摩擦学性能

CLC Number:

TH117

FAN Xin, REN Siming, WANG Haixin , PU Jibin. Environmental Adaptability and Tribological Properties of MoS2/WS2 Composite Films[J]. China Mechanical Engineering, 2022, 33(12): 1468-1476.

范昕, 任思明, 王海新, 蒲吉斌. MoS2/WS2复合薄膜的环境适应性和摩擦学性能[J]. 中国机械工程, 2022, 33(12): 1468-1476.

References

［1］谭新峰,雒建斌.润滑研究进展［J］.中国机械工程, 2020, 31(2):145-174.
TAN Xinfeng, LUO Jianbin. Research Advances of Lubrication ［J］. China Mechanical Engineering, 2020, 31(2):145-174.
［2］SINGER I L, FAYEULLE S, EHNI P D. Wear Behavior of Triode-sputtered MoS2 Coatings in Dry Sliding Contact with Steel and Ceramics ［J］. Wear, 1996, 195(1/2):7-20.
［3］徐增闯,崔维鑫,贺景坚,等.三种固液复合润滑系统的真空边界润滑特性［J］.中国机械工程, 2021, 32(11):1293-1298.
XU Zengchuang, CUI Weixin, HE Jingjian, et al. Vacuum Boundary Lubrication Performances of Three Solid-Liquid Composite Lubrication Systems ［J］. China Mechanical Engineering, 2021, 32(11):1293-1298.
［4］DUDDER G J, ZHAO X Y, KRICK B, et al. Environmental Effects on the Tribology and Microstructure of MoS2-Sb2O3-C Films ［J］. Tribology Letters, 2011, 42(2):203-213.
［5］SMITH C T G, DELKOWKI M, ANGUITA J V, et al. Complete Atomic Oxygen and UV Protection for Polymer and Composite Materials in a Low Earth Orbit ［J］. ACS Applied Materials & Interfaces, 2021, 13(5):6670-6677.
［6］商克栋,郑韶先,鞠鹏飞,等.南海海洋大气环境二硫化钼纳米多层薄膜摩擦学行为研究［J］.摩擦学学报, 2018, 38(4):417-429.
SHANG Kedong, ZHENG Shaoxian, JU Pengfei, et al. Tribological Performance of MoS2/Pb-Ti Nano-multilayer Coating Applied in Marine Atmospheric Environment of South China Sea ［J］. Tribology, 2018, 38(4):417-429.
［7］REN S M, SHANG K D, CUI M J, et al. Structural Design of MoS2-based Coatings toward High Humidity and Wide Temperature ［J］. Journal of Materials Science, 2019, 54(18):11889-11902.
［8］常可可,王立平,薛群基.极端工况下机械表面界面损伤与防护研究进展［J］.中国机械工程, 2020, 31(2):206-220.
CHANG Keke, WANG Liping, XUE Qunji. Progresses of Damage and Protection for Surfaces and Interfaces in Machinery under Extreme Operating Conditions ［J］. China Mechanical Engineering, 2020, 31(2):206-220.
［9］DING X Z, ZENG X T, HE X Y, et al. Tribological Properties of Cr- and Ti-doped MoS2 Composite Coatings under Different Humidity Atmosphere ［J］. Surface & Coatings Technology, 2010, 205(1):224-231.
［10］SHANG K D, ZHENG S X, REN S M, et al. Improving the Tribological and Corrosive Properties of MoS2-based Coatings by Dual-doping and Multilayer Construction ［J］. Applied Surface Science, 2018, 437:233-244.
［11］FAN X, SHI Y, CUI M, et al. MoS2/WS2 Nanosheet-based Composite Films Irradiated by Atomic Oxygen:Implications for Lubrication in Space ［J］. ACS Applied Nano Materials, 2021, 4(10):10307-10320.
［12］LI L, LU Z X, PU J B, et al. The Superlattice Structure and Self-adaptive Performance of C-Ti/MoS2 Composite Coatings ［J］. Ceramics International, 2020, 46(5):5733-5744.
［13］LI H, ZHANG G A, WANG L P. Low Humidity-sensitivity of MoS2/Pb Nanocomposite Coatings ［J］. Wear, 2016, 350/351:1-9.
［14］REN S M, LI H, CUI M J, et al. Functional Regulation of Pb-Ti/MoS2 Composite Coatings for Environmentally Adaptive Solid Lubrication ［J］. Applied Surface Science, 2017, 401:362-372.
［15］XIAO J, WANG X J, YANG X Q, et al. Electrochemically Induced High Capacity Displacement Reaction of PEO/MoS2/Graphene Nanocomposites with Lithium ［J］. Advanced Functional Materials, 2011, 21(15):2840-2846.
［16］陈凡燕,凤仪,杨茜婷,等.Ag-G-MoS2复合材料在不同气氛下的摩擦磨损性能研究［J］.中国机械工程, 2012, 23(5):537-542.
CHEN Fanyan, FENG Yi, YANG Xiting, et al. Friction and Wear Properties of Ag-G-MoS2 Composites in Different Ambiences ［J］. China Mechanical Engineering, 2012, 23(5):537-542.
［17］MOSER J, LEVY F. Growth Mechanisms and Near-interface Structure in Relation to Orientation of MoS2 Sputtered Thin-films ［J］. Journal of Materials Research, 1992, 7(3):734-740.
［18］FLEISCHAUER P D. Effects of Crystallite Orientation on Environmental Stability and Lubrication Properties of Sputtered MoS2 Thin-films ［J］. Tribology Transactions, 1984, 27(1):82-88.
［19］PLYUTO Y V, BABICH I V, PLYUTO I V, et al. XPS Studies of MoO3/Al2O3 and MoO3/SiO2 Systems ［J］. Applied Surface Science, 1997, 119(1/2):11-18.
［20］ZHANG X Q, XU J, CHAI L Q, et al. Carbon and Nitrogen Co-doping Self-assembled MoS2 Multilayer Films ［J］. Applied Surface Science, 2017, 406:30-38.
［21］PARK Y K, LIM C J, IM Y J, et al. Soft X-ray Spectroscopic Study on the Electronic Structure of WO3 Thin Films Fabricated under Various Annealing Temperature and Gas Flow Conditions ［J］. Current Applied Physics, 2021, 21:31-35.
［22］LU X F, LIU X C, ZHANG W J, et al. Large-scale Synthesis of Tungsten Oxide Nanofibers by Electrospinning ［J］. Journal of Colloid and Interface Science, 2006, 298(2):996-999.
［23］WONG K C, LU X, COTTER J, et al. Surface and Friction Characterization of MoS2 and WS2 Third Body Thin Films under Simulated Wheel/Rail Rolling-Sliding Contact ［J］. Wear, 2008, 264(7/8):526-534.
［24］BERTOTI I, MOHAI M, RENEVIER N M, et al. XPS Investigation of Ion Beam Treated MoS2-Ti Composite Coatings ［J］. Surface & Coatings Technology, 2000, 125(1/3):173-178.
［25］DUAN Z W, ZHAO X Y, NA Z G, et al. Mo-S-Ti-C Nanocomposite Films for Solid-state Lubrication ［J］. ACS Applied Nano Materials, 2019, 2(3):1302-1312.
［26］AYYAGARI A V, MUTYALA K C, SUMANT A V. Towards Developing Robust Solid Lubricant Operable in Multifarious Environments ［J］. Scientific Reports, 2020, 10(1):15390.

[1]	LI Yingchun, NIE Aonan, YANG Mingxuan, ZHU Dingkang, QIU Ming, YANG Gengsheng. Research on Thermal Characteristics of Auxiliary Bearing in AMBs and Friction Reduction Design [J]. China Mechanical Engineering, 2024, 35(04): 646-655.
[2]	LIANG Yongbin, FU Guang, LIN Zhigui, HE Zhicheng, ZHANG Jialuo, CHEN Tao. Design of Lane Keeping Assist Systems Based on Improved Preview Control Model [J]. China Mechanical Engineering, 2024, 35(03): 548-558.
[3]	HUANG Wei, CHI Cheng. Analysis for Aero -elastic Characteristics of Prop-Rotor in Hover with a Swept Tip [J]. China Mechanical Engineering, 2024, 35(02): 191-200.
[4]	XU Zuolin, HUANG Chuanzhen, LIU Huanlian, LIU Dun. Coating Technology and Mechanism of Modified Diamond Powder by Surface Coating of WC Powders [J]. China Mechanical Engineering, 2024, 35(02): 208-214.
[5]	YUE Jianfeng, LONG Xinyu, HUANG Yunlong, GUO Jialong, LIU Wenji. On-line Identification of Narrow Gap P-GMAW Sidewall Fusion States Based on Arc Acoustic Signals [J]. China Mechanical Engineering, 2024, 35(02): 244-250，259.
[6]	DU Xu, CHANG Zexin, ZHENG Junqiang, REN Pengfei. A Real-time Tool Path Smoothing Algorithm Considering Joint Jerk Constraints [J]. China Mechanical Engineering, 2024, 35(02): 280-286.
[7]	SUN Yuxiang, CHEN Li, LONG Bo, WANG Yanping, LIU Shihua, JIA Kun. Intelligent Layout for Pipeline Supports of Nuclear Power Plant under Complex Load [J]. China Mechanical Engineering, 2024, 35(02): 317-323，336.
[8]	LI Mozhi, ZHU Wenfeng, WANG Shunchao. Roller Pose Compensation in Automotive Body Roll-hemming Forming Process with Adhesive for Dimensional Deviation [J]. China Mechanical Engineering, 2024, 35(02): 364-370.
[9]	WANG Weijun, YANG Guilin, DU Qinghao, CHEN Qingying, . Design of 3K Planetary Gear Reducers with No Backlash [J]. China Mechanical Engineering, 2024, 35(01): 36-44,55.
[10]	GAO Jin, CUI Haibing, FAN Tao, LI Ang, DU Zunfeng. A Structural Reliability Calculation Method Based on Adaptive Kriging Ensemble Model [J]. China Mechanical Engineering, 2024, 35(01): 83-92.
[11]	SUN Haitao, ZHAN Mei, FAN Xiaoguang, GUO Jing, HAN Chao, ZHANG Jun. Research Progresses and Prospects of Compression Molding of High-performance PBX [J]. China Mechanical Engineering, 2024, 35(01): 160-180.
[12]	ZHU Fuxian, QIU Gang, ZHU Xingmin, XU Xianyi, ZHOU Jinyu. Failure Mode and Progressive Damage Analyses of Carbon-glass Hybrid Composite Single Nail and Single Shear Bolted Joints [J]. China Mechanical Engineering, 2023, 34(23): 2781-2793.
[13]	HAO Zhuangzhuang, ZHANG Qingchun, HU Yunbo, GUO Yibin, WANG Donghua, LI Wanyou. Research on Influences of Tooth Friction and Geometric Eccentricity Errors on Mesh Stiffness of Profile Shifted Spur Gear Pairs [J]. China Mechanical Engineering, 2023, 34(23): 2812-2823.
[14]	YU Shubo, LIU Zhansheng, ZHAO Chen. Dynamics Simulation Data Driven Domain Adaptive Intelligent Fault Diagnosis [J]. China Mechanical Engineering, 2023, 34(23): 2832-2841.
[15]	LIU Xiaobao, YAN Qingxiu, YI Bin, YAO Tingqiang, GU Wenjuan. Optimization of Process Parameters in Process Manufacturing Based on Ensemble Learning and Improved Particle Swarm Optimization Algorithm [J]. China Mechanical Engineering, 2023, 34(23): 2842-2853.