Time Domain Dynamics Topology Optimization of Functionally Gradient Material Structures with Self-weight Load

doi:10.3969/j.issn.1004-132X.2022.23.001

China Mechanical Engineering ›› 2022, Vol. 33 ›› Issue (23): 2774-2782.DOI: 10.3969/j.issn.1004-132X.2022.23.001

Previous Articles Next Articles

Time Domain Dynamics Topology Optimization of Functionally Gradient Material Structures with Self-weight Load

WEN Guilin1;CHEN Gaoxi2;WANG Hongxin2;XUE Liang3;WEI Peng4;LIU Jie1，2

1.School of Mechanical Engineering，Yanshan University，Qinhuangdao，Hebei，066004
2.School of Mechanical and Electrical Engineering，Guangzhou University，Guangzhou，510006
3.School of Mechanical and Vehicle Engineering，Hunan University，Changsha，410082
4.School of Civil Engineering and Transportation，South China University of Technology，Guangzhou，510641

Online:2022-12-10 Published:2022-12-27

含自重载荷的功能梯度材料结构时域动力学拓扑优化设计

文桂林1;陈高锡2;王洪鑫2 ;薛亮3;魏鹏4;刘杰1，2

1.燕山大学机械工程学院，秦皇岛，066004
2.广州大学机械与电气工程学院，广州，510006
3.湖南大学机械与运载工程学院，长沙，410082
4.华南理工大学土木与交通学院，广州，510641

通讯作者: 刘杰（通信作者），男，1989年生，副教授。研究方向为结构动力学分析与优化。E-mail：jliu@gzhu.edu.cn或jliu@ysu.edu.cn。
作者简介:文桂林，男，1970年生，教授、博士研究生导师。研究方向为动力学理论与控制、特种装备与特种车辆设计与开发。E-mail：glwen@ysu.edu.cn。
基金资助:
国家自然科学基金（11902085，11832009，12172095）

Abstract

Abstract: A time domain dynamics topology optimization design method of FGM with self-weight load was developed. A structural self-weight distribution strategy of FGM-SIMP gradient materials was proposed under the framework of solid isotropic material with penalization（SIMP）. The dynamics topology optimization formulations were established with minimum dynamic compliance as the optimization objective and structural volume as the constraints. The sensitivity was derived in the time domain based on the adjoint method and solved by the method of moving asymptotes（MMA）. The topology optimization design of FGM structures with self-weight load was systematically analyzed through 2D and 3D typical numerical examples. Besides， the effects of the self-weight loads and the direction of material gradient distribution on the topology optimization results were deeply discussed. It is found that the self-weight loads and the direction of material gradient distributions have a significant influence on the optimal configuration and dynamic stiffness of the FGM structures. Finally， taking homogeneous materials（a special case of FGM）as an example， the validity of the proposed method was verified by numerical simulations and experiments， it is found that the proposed method may effectively improve the resonance frequency and dynamic stiffness.

Key words: structural topology optimization, time domain dynamics analysis, structural self-weight, functionally gradient materials（FGM）

摘要： 提出了一种含自重载荷的功能梯度材料（FGM）结构时域动力学拓扑优化设计方法。在固体各向同性材料惩罚（SIMP）框架下，提出了一种针对FGM-SIMP的结构自重载荷分布策略。以FGM结构动柔度最小为优化目标、以结构体积为约束，建立了动力学结构优化列式。基于伴随法，在时域内进行了灵敏度推导，并用移动渐近线方法进行求解。通过二维和三维典型数值算例系统研究了含自重载荷下FGM结构的拓扑优化设计问题，并深入探讨了自重载荷和材料梯度分布方向对结构优化结果的影响，发现自重载荷和材料梯度分布方向对FGM结构的优化构型和动刚度具有很大影响。最后，以均一材料（FGM的特例）为例，通过数值仿真和实验测试方法验证了所提方法的有效性，并证实了所提方法可有效提高结构的固有频率和结构动刚度。

关键词: 结构拓扑优化, 时域动力学分析, 结构自重, 功能梯度材料

CLC Number:

TB34

WEN Guilin, CHEN Gaoxi, WANG Hongxin, XUE Liang, WEI Peng, LIU Jie, . Time Domain Dynamics Topology Optimization of Functionally Gradient Material Structures with Self-weight Load[J]. China Mechanical Engineering, 2022, 33(23): 2774-2782.

文桂林, 陈高锡, 王洪鑫 , 薛亮, 魏鹏, 刘杰, . 含自重载荷的功能梯度材料结构时域动力学拓扑优化设计[J]. 中国机械工程, 2022, 33(23): 2774-2782.

References

［1］廉艳平，王潘丁，高杰，等. 金属增材制造若干关键力学问题研究进展［J］. 力学进展， 2021， 51（3）：1-54.
LIAN Yanping， WANG Panding， GAO Jie， et al. Fundamental Mechanics Problems in Metal Additive Manufacturing：a State-of-art Review［J］. Advances in Mechanics， 2021， 51（3）：1-54.
［2］LIU J， CHEN T， ZHANG Y， et al. On Sound Insulation of Pyramidal Lattice Sandwich Structure［J］. Composite Structures， 2019， 208：385-394.
［3］郑宇，郭策，马耀鹏，等. 仿生多层级柔性轻质结构的设计、制备及力学性能分析［J］. 中国机械工程， 2021， 32（23）：2876-2882.
ZHENG Yu， GUO Ce， MA Yaopeng， et al. Design， Fabrication and Mechanics Property Analysis of Bionic Multilayer Flexible Lightweight Structures［J］. China Mechanical Engineering， 2021， 32（23）：2876-2882.
［4］NELLI S E C， PAULINO G H. Topology Optimization Design of Functionally Graded Structures［C］∥The 6th World Congresses of structural and Multidisciplinary Optimization. Rio de Janeiro， 2005.
［5］XIA Q， WANG M Y. Simultaneous Optimization of the Material Properties and the Topology of Functionally Graded Structures［J］. Computer-Aided Design， 2008， 40（6）：660-675.
［6］LI H， LUO Z， GAO L， et al. Topology Optimization for Functionally Graded Cellular Composites with Metamaterials by Level Sets［J］. Computer Methods in Applied Mechanics and Engineering， 2018， 328：240-364.
［7］邱克鹏，张卫红. 功能梯度材料结构拓扑优化设计研究［J］. 西北工业大学学报， 2010， 28（6）：851-857.
QIU Kepeng， ZHANG Weihong. Improving Topologica Desig of FGM（Functionally Graded Material）Structure［J］. Journal of Northwestern Polytechnical University， 2010， 28（6）：851-857.
［8］李信卿，赵清海，张洪信，等. 周期性功能梯度结构稳态热传导拓扑优化设计［J］. 中国机械工程， 2021， 32（19）：2348-2356.
LI Xinqing， ZHAO Qinghai， ZHANG Hongxin， et al. Steady-state Heat Conduction Topology Optimization Design for Periodic Functional Gradient Structures［J］. China Mechanical Engineering， 2021， 32（19）：2348-2356.
［9］CHEN B C， KIKUCHI N. Topology Optimization with Design-dependent Loads［J］. Finite Elements in Analysis and Design， 2001， 37（1）：57-70.
［10］BRUYNEEL M， DUYSINX P. Note on Topology Optimization of Continuum Structures Including Self-weight［J］. Structural and Multidisciplinary Optimization， 2005， 29（4）：245-256.
［11］张晖，刘书田，张雄. 考虑自重载荷作用的连续体结构拓扑优化［J］. 力学学报， 2009， 41（1）：98-104.
ZHAGN Hui， LIU Shutian， ZHANG Xiong. Topology Optimizationof Continuum Structures Subjected to Self Weight Loads［J］. Chinese Journal of Theoretical and Applied Mechanics， 2009， 41（1）：98-104.
［12］HUANG X， XIE Y M. Evolutionary Topology Optimization of Continuum Structures Including Design-dependent Self-weight Loads［J］. Finite Elements in Analysis and Design， 2011， 47（8）：942-948.
［13］王选，胡平，祝雪峰，等. 考虑结构自重的基于NURBS插值的三维拓扑描述函数法［J］. 力学学报， 2016， 48（6）：1438-1445.
WANG Xuan， HU Ping， ZHU Xuefeng， et al. Topology Description Function Approach Using Nurbs Interpolation for 3D Structures with Self-weight Loads［J］. Chinese Journal of Theoretical and Applied Mechanics， 2016， 48（6）：1438-1445.
［14］OLIVER G， MIGUEL A A， GLAUCIO H P. Local Stress Constraints in Topology Optimization of Structures Subjected to Arbitrary Dynamic Loads：a Stress Aggregation-free Approach［J］. Structural and Multidisciplinary Optimization， 2021， 64（6）：3287-3309.
［15］ZHAO J， WANG C. Topology Optimization for Minimizing the Maximum Dynamic Response in the Time Domain Using Aggregation Functional Method［J］. Computers and Structures， 2017， 190：41-60.
［16］KANG Z， HE J， SHI L， et al. A Method Using Successive Iteration of Analysis and Design for Large-scale Topology Optimization Considering Eigenfrequencies［J］. Computer Methods in Applied Mechanics and Engineering， 2020， 362， 112847.
［17］KRISTER S. The Method of Moving Asymptotes：a New Method for structural Optimization［J］. International Journal for Numerical Methods in Engineering， 1987， 24：359-373.

[1]	DING Xiao-Gong-1, LI Guo-Jie-2. Layout Design Optimization of Stiffener Plates Inside Housing Structures [J]. China Mechanical Engineering, 2012, 23(4): 449-453.
[2]	HOU Jian-Yun, DING Xiao-Gong. SKO Structural Topology Optimization Method Based on a Continuous Step-up Reference Stress Criterion [J]. China Mechanical Engineering, 2012, 23(1): 28-33.
[3]	Ding Xiaohong;Cheng Li . Topology Optimization of Full-stressed Structures Based on SKO Method [J]. J4, 2009, 20(15): 0-1770.

Time Domain Dynamics Topology Optimization of Functionally Gradient Material Structures with Self-weight Load

含自重载荷的功能梯度材料结构时域动力学拓扑优化设计

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 3

Recommended Articles

Metrics