Research on Laser Remanufacturing Method and Experiments of Valve Core Parts

doi:10.3969/j.issn.1004-132X.2023.04.009

Abstract

Abstract: In order to achieve high-quality repair of damaged valve core parts， a remanufacturing process method was proposed based on geometric reconstruction and path-pose planning. The principles of remanufacturing boundary preprocess were introduced to design the geometric characteristics of damaged parts in valve core and the implementation steps were described in detail. The boundary surface and the three-dimensional model of the valve core to be repaired were reconstructed with high precision based on NURBS theory. The remanufacturing processing path was generated using a cross-sectional plane method， and each interpolation point coordinates were calculated according to the line approximation and the error control principles. The spot area was combined with the interpolation point gesture to determine the dynamic positions of laser spray head. An ABB robot simulation system was used to verify the correctness of the laser cladding paths and the laser spray head positions. Subsequently， the remanufacturing experiments of valve core parts were performed through the execution code generated by the simulation system. The results show that the planned path and positioning in the method may effectively follow the remanufacturing boundary surface in valve core parts. The formed molten coating is relatively dense and does not find pores and cracks. The coating grain size and average hardness are as 14～54 μm and 573.6HV0.5±51.8HV0.5， respectively. The erosion resistance of the coating is improved by 30.8%. The processing method may meet the remanufacturing requirements of damaged valve core parts.

Key words: valve core, remanufacturing, geometric reconstruction, processing path, position and posture, property

摘要： 为了实现损伤阀芯零件的高质量修复，提出了一种基于几何重构与路径位姿规划的阀芯再制造工艺方法。引入再制造边界预制原则对阀芯损伤部位进行预处理设计并制定其实施步骤，基于NURBS理论实现了再制造边界曲面及待修复阀芯模型的高精度重构；采用等距截平面法生成再制造工艺路径，根据直线逼近和误差控制原理计算了各插补点坐标，并将光斑面积与插补点姿态相结合确定激光喷头动态位姿；运用ABB机器人系统进行路径与位姿校验并导出代码进行了阀芯再制造实践。结果表明：所提方法中规划路径及位姿能够有效跟随阀芯再制造边界曲面进行熔覆，形成了无气孔、无裂纹的致密涂层，涂层晶粒尺寸和平均硬度分别为14～54 μm和573.6HV0.5±51.8HV0.5，耐冲蚀腐蚀性能提高了30.8%，满足阀芯再制造要求。

关键词: 阀芯, 再制造, 几何重构, 加工路径, 位姿, 性能

CLC Number:

SHU Linsen, GONG Jiangtao, DONG Yue, SU Chengming, WANG Xin. Research on Laser Remanufacturing Method and Experiments of Valve Core Parts[J]. China Mechanical Engineering, 2023, 34(04): 446-453.

舒林森, 巩江涛, 董月, 苏成明, 王昕. 阀芯零件激光再制造工艺方法及试验研究[J]. 中国机械工程, 2023, 34(04): 446-453.

References

［1］QIAN J Y， HOU C W， MU J， et al.Valve Core Shapes Analysis on Flux through Control Valves in Nuclear Power Plants［J］.Nuclear Engineering and Technology， 2020， 52（10）：2173-2182.
［2］张露匀，丁宇亭，李文辉，等.用于阀芯类零件去毛刺的磁极板优化设计与实验研究［J］.表面技术， 2020， 49（11）：342-350.
ZHANG Luyun， DING Yuting， LI Wenhui， et al.Optimal Design and Experimental Study of Magnetic Plate for Deburring Valve Spool Parts［J］.Surface Technology， 2020， 49（11）：342-350.
［3］张斌，陈岁元，梁京，等.短应力线轧机激光再制造现状及发展趋势［J］.材料工程， 2019， 47（11）：43-52.
ZHANG Bin， CHEN Suiyuan， LIANG Jing， et al.Current Situation and Development Trend of Laser Remanufacturing of Short Stress Line Mill［J］.Materials Engineering， 2019， 47（11）：43-52.
［4］HUANG W， JIANG Z， WANG T， et al.Remanufacturing Scheme Design for Used Parts Based on Incomplete Information Reconstruction［J］.Chinese Journal of Mechanical Engineering， 2020， 33（3）：80-93.
［5］王蕾，周楚建，张泽琳，等.考虑层间停光的废旧机械零件多区域多层激光熔覆路径规划［J］.机械工程学报， 2021， 57（15）：211-221.
WANG Lei， ZHOU Chujian， ZHANG Zelin， et al.Multi-zone and Multi-layer Laser Cladding Path Planning for Used Mechanical Parts Considering Interlayer Stop Light［J］.Journal of Mechanical Engineering， 2021， 57（15）：211-221.
［6］郑华栋，丛明，刘毅，等.面向增材制造的机器人轨迹自动生成技术［J］.计算机集成制造系统， 2018， 24（4）：956-963.
ZHENG Huadong， CONG Ming， LIU Yi， et al.Robot Trajectory Automatic Generation Technology for Additive Manufacturing［J］.Computer Integrated Manufacturing Systems， 2018， 24（4）：956-963.
［7］王浩，赵世伟，王立文，等.离心压缩机受损叶轮再制造方法［J］.农业机械学报， 2016， 47（5）：407-412.
WANG Hao， ZHAO Shiwei， WANG Liwen， et al.Remanufacturing Method for Damaged Impeller of Centrifugal Compressor［J］.Transactions of the Chinese Society for Agricultural Machinery， 2016， 47（5）：407-412.
［8］刘立峰，杨洗陈.基于逆向工程的激光再制造机器人路径规划［J］.中国激光， 2011， 38（7）：142-145.
LIU Lifeng， YANG Xifeng.Path Planning of Laser Remanufacturing Robot Based on Reverse Engineering［J］.Chinese Journal of Lasers， 2011， 38（7）：142-145.
［9］黄海博，孙文磊，张冠，等.基于NURBS曲面的汽轮机叶片激光熔覆再制造路径规划［J］.中国表面工程， 2018， 31（5）：175-183.
HUANG Haibo， SUN Wenlei， ZHANG Guan， et al.Path Planning for Laser Cladding Remanufacturing of Steam Turbine Blade Based on NURBS Surface［J］.China Surface Engineering， 2018， 31（5）：175-183.
［10］刘金朵，孙文磊，黄勇，等.曲面零件激光熔覆轨迹的快速算法与自动生成［J］.表面技术， 2018， 47（9）：223-228.
LIU Jinduo， SUN Wenlei， HUANG Yong， et al.Fast Algorithm and Automatic Generation of Laser Cladding Trajectory for Curved Parts［J］.Surface Technology， 2018， 47（9）：223-228.
［11］ZHENG Huadong， CONG Ming， DONG Hang， et al.CAD-based Automatic Path Generation and Optimization for Laser Cladding Robot in Additive Manufacturing［J］.The International Journal of Advanced Manufacturing Technology， 2017， 92（9/12）：3605-3614.
［12］朱心雄.自由曲线曲面造型技术［M］.北京：科学出版社， 2003.
ZHU Xinxiong.Free Surface Modeling Technique［M］.Beijing：Science Press， 2003.
［13］舒林森，曹华军，许磊，等.离心压缩机再制造叶轮结构特征三维建模方法及应用［J］.机械工程学报， 2014， 50（3）：184-190.
SHU Linsen， CAO Huajun， XU Lei， et al.Three-dimensional Modeling Method and Application of Remanufacturing Impeller of Centrifugal Compressor［J］.Journal of Mechanical Engineering， 2014， 50（3）：184-190.
［14］周嘉利，程延海，陈永雄，等.激光熔覆工艺参数对铁基双层涂层组织和残余应力的影响［J］.中国机械工程， 2022， 33（12）：1418-1426.
ZHOU Jiali， CHENG Yanhai， CHEN Yongxiong， et al.Effect of Laser Cladding Process Parameters on Microstructure and Residual Stress of Iron-based Double-layer Coatings［J］.China Mechanical Engineering， 2022， 33（12）：1418-1426.
［15］RASHID R， BARR C J， PALANISAMY S， et al.Effect of Clad Orientation on the Mechanical Properties of Laser-clad Repaired Ultra-high Strength 300M Steel［J］.Surface and Coatings Technology， 2019， 380：125090.
［16］韩兴国，宋小辉，殷鸣，等.一种复杂曲面类增材制造零件分层截面生成算法［J］.机械工程学报， 2019， 55（15）：88-98.
HAN Xingguo， SONG Xiaohui， YIN Ming， et al.An Algorithm for Generating Layered Section of Complex Surface Additive Manufacturing Parts［J］.Journal of Mechanical Engineering， 2019， 55（15）：88-98.
［17］黄婷，许辉，樊成，等.叶片复杂曲面的机器人抛磨工艺规划［J］.光学精密工程， 2018， 26（1）：132-141.
HUANG Ting， XU Hui， FAN Cheng， et al.Robot Polishing Process Planning for Complex Surface of Blade［J］.Optics and Precision Engineering， 2018， 26（1）：132-141.
［18］陈影，孙文磊，黄勇，等.曲面零件的激光熔覆路径规划［J］.激光与光电子学进展， 2016， 53（6）：214-222.
CHEN Ying， SUN Wenlei， HUANG Yong， et al.Laser Cladding Path Planning for Curved Parts［J］.Laser and Optoelectronics Progress， 2016， 53（6）：214-222.
［19］陈影，孙文磊，黄勇，等.激光熔覆曲面零件再制造的机器人路径规划［J］.中国激光， 2017， 44（5）：79-88.
CHEN Ying， SUN Wenlei， HUANG Yong， et al.Robot Path Planning for Remanufacturing of Laser Cladding Curved Parts［J］.Chinese Journal of Lasers， 2017， 44（5）：79-88.

[1]	NI Jing, CUI Zhi, HE Lihua, FU Xin, ZHU Zefei. State-of-the-Art of Cutting Technology and Applications of PTFE [J]. China Mechanical Engineering, 2024, 35(03): 498-514.
[2]	TWANG Wei, MA Qianlun, BAI Zhenhua, WANG Ziang. Mechanics Property Prediction of Cold Rolled High Strength Steel Coils Based on GBD#br# [J]. China Mechanical Engineering, 2023, 34(18): 2222-2229.
[3]	LIU Ying, CHEN Yue, ZHAO Xueli, YU Tongmin, ZHU Tieli, . Study on Properties of Ultrasonic-assisted Injection Molding of Carbon Fiber-reinforced Polypropylene Parts [J]. China Mechanical Engineering, 2023, 34(16): 1975-1981.
[4]	LI Guangjun, DUAN Hong, XU Lei, KAN Chen, LIU Zhongliang, GAO Xiaodong. Research on Friction and Wear Behaviors of Al7.8Co20.6Cr12.2Fe11.5Ni40.7Ti7.2 High-entropy Superalloy [J]. China Mechanical Engineering, 2023, 34(13): 1568-1575.
[5]	WANG Fei, FENG Yi, LI Xinchao, LIU Zhuhan. Research on Multiple Arc Erosion Properties of Cu-Diamond Composites [J]. China Mechanical Engineering, 2023, 34(13): 1599-1604.
[6]	ZHOU Houming, CHEN Haoyue, LI Shengui. Preparation and Mechanics Properties of Al2O3/ZrO2 Ceramic Tool Materials Based on Gradient Structure [J]. China Mechanical Engineering, 2023, 34(10): 1199-1207.
[7]	GAO Kai, LI Kun, GU Hongli, . Effects of Amount of Galvanization on Microstructure and Mechanics Properties of Joints Made by Induction-pressure Welding of Low Alloy Steel/5052 Aluminum Alloy [J]. China Mechanical Engineering, 2023, 34(10): 1220-1229.
[8]	YANG Shuo, ZHANG Jie, KONG Ning, WANG Haowei, WANG Xiaoyu, ZHUANG Yuan. Deformation Law　Model and Simulation Verification of Pod Structures with Large Exhibition-to-receive Ratio for Aerospace Applications [J]. China Mechanical Engineering, 2023, 34(07): 780-788.
[9]	LI Hongyu, HUANG Xiangming, MING Yang, LI Xiyang, ZENG Qing, ZHOU Dongdong. Simulation and Experimental Study of Magnetic Field-assisted Shear Thickening Fluid Polishing for Cemented Carbide Blades [J]. China Mechanical Engineering, 2023, 34(06): 650-659.
[10]	XING Haiyan, ZHU Kongyang, ZHANG Po, LIU Chuan, DUAN Chengkai, LIU Weinan, LIU Chao. Characterization Model of Critical State of Crack Closure Based on Magnetic Property [J]. China Mechanical Engineering, 2023, 34(04): 414-420.
[11]	ZHANG Yan, HUANG Chuanzhen, LIU Hanlian. Sintering and Mechanics Properties of C3N4 Based Ceramic Tool Materials [J]. China Mechanical Engineering, 2023, 34(03): 352-358，368.
[12]	ZHOU Di, LI Yanting, PAN Ershun. Multivariate Coupled Statistics Monitoring of Wafer Manufacturing Overlay Errors Based on CopulaHAO Lanyu [J]. China Mechanical Engineering, 2023, 34(03): 369-377.
[13]	FANG Xuewei, JIANG Xiao, WANG Zhe, WU Xiaokang, HUANG Ke. Forming Process Optimization of Wire and Arc Additive Manufactured High-strength Steel ER120S-G [J]. China Mechanical Engineering, 2023, 34(02): 218-225.
[14]	JIANG Chuangyu, ZHANG Baoqiang, CHEN Yun, WANG Cunfu, LUO Huageng, HU Jiexiang, CAO Longchao. Study on Mechanics Properties and Numerical Convergence of Gyroid Cellular Structures [J]. China Mechanical Engineering, 2022, 33(23): 2790-28000.
[15]	JIAO Chen, CHAO Long, ZHU Lei, SHEN Lida, LIANG Huixin, DAI Ning, WANG Changjiang, SUN Jun. Design and Manufacture Method of Bionic Porous Structures for Orthopedic Implants [J]. China Mechanical Engineering, 2022, 33(23): 2844-2850.