[1]薛芳, 韩潇, 孙东华. 3D打印技术在航天复合材料制造中的应用[J]. 航天返回与遥感, 2015, 36(2):77-82.
XUE Fang, HAN Xiao, SUN Donghua. The Application of 3D Printing Technology in Space Composites Manufacturing[J]. Spacecraft Recovery & Remote Sensing, 2015, 36(2):77-82.
[2]CUAN-URQUIZO E, BAROCIO E, TEJADA-ORTIGOZA V, et al. Characterization of the Mechanical Properties of FFF Structures and Materials:A Review on the Experimental, Computational and Theoretical Approaches[J]. Materials (Basel), 2019, 12(6):895.
[3]POPESCU D, ZAPCIU A, AMZA C, et al. FDM Process Parameters Influence over the Mechanical Properties of Polymer Specimens:A Review[J]. Polymer Testing, 2018, 69:157-166.
[4]KAUR G, SINGARI R M, KUMAR H. A Review of Fused Filament Fabrication (FFF):Process Parameters and Their Impact on the Tribological Behavior of Polymers(ABS)[J]. Materials Today:Proceedings, 2022, 51:854-860.
[5]SHARMA A, RAI A. Fused Deposition Modelling(FDM) Based 3D & 4D Printing:A State of Art Review[J]. Materials Today:Proceedings, 2022, 62(1):367-372.
[6]SOLOMON I J, SEVVEL P, GUNASEKARAN J. A Review on the Various Processing Parameters in FDM[J]. Materials Today:Proceedings, 2021, 37:509-514.
[7]KAMPKER A, TRIEBS J, KAWOLLEK S, et al. Review on Machine Designs of Material Extrusion Based Additive Manufacturing(AM) Systems-status-quo and Potential Analysis for Future AM Systems[J]. Procedia CIRP, 2019, 81:815-819.
[8]刁怀东. 五轴熔融沉积成型三维打印装备及关键工艺研究[D]. 杭州:浙江大学, 2018.
DIAO Huaidong. Research on Equipment Design and Critical Technique of 5_Axis Fused Deposition Modeling Process[D]. Hangzhou:Zhejiang University, 2018.
[9]戴鑫, 冯春梅, 徐泽玮, 等. 机器人3D打印技术的应用进展[J]. 机械设计与制造工程, 2020, 49(6):17-22.
DAI Xin, FENG Chunmei, XU Zewei, et al. Application Progress of Robot 3D Printing Technology[J]. Machine Design and Manufacturing Engineering, 2020, 49(6):17-22.
[10]SONG X, PAN Y, CHEN Y. Development of a Low-cost Parallel Kinematic Machine for Multidirectional Additive Manufacturing[J]. Journal of Manufacturing Science and Engineering, 2015, 137(2):021005.
[11]刘磊. 面向无支撑3D打印的五轴FDM系统关键技术研究[D]. 南京:南京航空航天大学, 2020.
LIU Lei. Research on Key Technologies of Five-axis FDM System for Unsupported 3D Printing[D]. Nanjing:Nanjing University of Aeronautics and Astronautics, 2020.
[12]ISHAK B, FISHER J, LAROCHELLE P. Robot Arm Platform for Additive Manufacturing:Multi-plane Printing[C]∥Proceedings of the 2016 Florida Conference on Recent Advances in Robotics(FCRAR 2016). Charlotte, 2016:V05AT07A063.
[13]URHAL P, WEIGHTMAN A, DIVER C, et al. Robot Assisted Additive Manufacturing:A Review[J]. Robotics and Computer-Integrated Manufacturing, 2019, 59:335-345.
[14]ZHANG G Q, SPAAK A, MARTINEZ C, et al. Robotic Additive Manufacturing Process Simulation-towards Design and Analysis with Building Parameter in Consideration[C]∥2016 IEEE International Conference on Automation Science and Engineering(CASE). Fort Worth, 2016:609-613.
[15]WU C, DAI C, FANG G, et al. RoboFDM:A Robotic System for Support-free Fabrication Using FDM[C]∥2017 IEEE International Conference on Robotics and Automation(ICRA). Singapore, 2017:1175-1180.
[16]MAGNONI P, REBAIOLI L, FASSI I, et al. Robotic AM System for Plastic Materials:Tuning and On-line Adjustment of Process Parameters[J]. Procedia Manufacturing, 2017, 11:346-354.
[17]SIEMASZ R, TOMCZUK K, MALECHA Z. 3D Printed Robotic Arm with Elements of Artificial Intelligence[J]. Procedia Computer Science, 2020, 176:3741-3750.
[18]WULLE F, WOLF M, RIEDEL O, et al. Method for Load-capable Path Planning in Multi-axis Fused Deposition Modeling[J]. Procedia CIRP, 2019, 84:335-340.
[19]BADARINATH R, PRABHU V. Integration and Evaluation of Robotic Fused Filament Fabrication System[J]. Additive Manufacturing, 2021, 41:101951.
[20]LI L, HAGHIGHI A, YANG Y. A Novel 6-Axis Hybrid Additive-subtractive Manufacturing Process:Design and Case Studies[J]. Journal of Manufacturing Processes, 2018, 33:150-160.
[21]杜冰, 刘后常, 潘鑫, 等. 热塑性复合材料夹芯结构熔融连接研究进展[J]. 复合材料学报, 2022, 39(7):3044-3058.
DU Bing, LIU Houchang, PAN Xin, et al. Progress in Fusion Bonding of Thermoplastic Composite Sandwich Structures[J]. Acta Material Composite Sinica, 2022, 39(7):3044-3058.
[22]COMPTON B G, LEWIS J A. 3D-Printing of Lightweight Cellular Composites[J]. Advanced Materials, 2014, 26(34):5930-5935.
[23]BUICAN G R, ZAHARIA S-M, POP M A, et al. Fabrication and Characterization of Fiber-reinforced Composite Sandwich Structures Obtained by Fused Filament Fabrication Process[J]. Coatings, 2021, 11(5):601.
[24]WERNER J, ABURAIA M, RASCHENDORFER A, et al. MeshSlicer:A 3D-Printing Software for Printing 3D-Models with a 6-Axis Industrial Robot[J]. Procedia CIRP, 2021, 99:110-115.
[25]LEPOIVRE A, BOYARD N, LEVY A, et al. Heat Transfer and Adhesion Study for the FFF Additive Manufacturing Process[J]. Procedia Manufacturing, 2020, 47:948-955.
[26]WACH R A, WOLSZCZAK P, ADAMUS-WLODARCZYK A. Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing[J]. 2018, 303(9):1800169.
[27]HAN P, TOFANGCHI A, DESHPANDE A, et al. An Approach to Improve Interface Healing in FFF-3D Printed Ultem 1010 Using Laser Pre-deposition Heating[J]. Procedia Manufacturing, 2019, 34:672-677.[28]SHIH C C, BURNETTE M, STAACK D, et al. Effects of Cold Plasma Treatment on Interlayer Bonding Strength in FFF Process[J]. Additive Manufacturing, 2019, 25:104-111.
[29]YIN J, LU C, FU J, et al. Interfacial Bonding during Multi-material Fused Deposition Modeling (FDM) Process due to Inter-molecular Diffusion[J]. Materials & Design, 2018, 150:104-112.
[30]ZHOU M, ZHOU X, SI L, et al. Modeling of Bonding Strength for Fused Filament Fabrication Considering Bonding Interface Evolution and Molecular Diffusion[J]. Journal of Manufacturing Processes, 2021, 68:1485-1494.
[31]WANG S, MA Y, DENG Z, et al. Effects of Fused Deposition Modeling Mrocess Parameters on Tensile, Dynamic Mechanical Properties of 3D Printed Polylactic Acid Materials[J]. Polymer Testing, 2020, 86:106483.
[32]GOH G D, YAP Y L, TAN H K J, et al. Process-structure-properties in Polymer Additive Manufacturing via Material Extrusion:A Review[J]. Critical Reviews in Solid State and Materials Sciences, 2020, 45(2):113-133.
[33]HARRIS M, POTGIETER J, ARCHER R, et al. Effect of Material and Process Specific Factors on the Strength of Printed Parts in Fused Filament Fabrication:A Review of Recent Developments[J]. Materials, 2019, 12(10):1664.
[34]徐子又, 胡镔, 邢泽华, 等. 层间预熔温度对熔融沉积成型打印件力学性能的影响[J]. 塑料科技, 2019, 47(5):37-43.
XU Ziyou, HU Bin, XING Zehua, et al. Effect of Interlayer Premelting Temperature on Mechanical Properties of Fused Deposition Molded Printed Parts[J]. Plastics Science and Technology, 2019, 47(5):37-43.
[35]徐子又. 预熔喷头式FDM成型装备开发及工艺研究[D]. 武汉:华中科技大学, 2019.
Xu Ziyou. Development and Technology Research of Premelt Nozzle FDM Molding Equipment[D]. Wuhan:Huazhong University of Science & Technology, 2019.
|