杆式超声电机定子的动力学分析与优化设计

J4 ›› 2008, Vol. 19 ›› Issue (21): 0-2524.

• 科学基金 •

杆式超声电机定子的动力学分析与优化设计

朱华1;曾劲松2;赵淳生1

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2008-11-10 发布日期:2008-11-10

Dynamics Analysis and Optimal Design of the Stator for a Rod-shape Ultrasomic Motor

Zhu Hua1;Zeng Jingsong2;Zhao Chunsheng1

Received:1900-01-01 Revised:1900-01-01 Online:2008-11-10 Published:2008-11-10

摘要/Abstract

摘要：

利用有限元理论建立了具有复杂外形的杆式超声电机定子的机电耦合动力学模型。利用该模型对定子的动力学特性进行了求解，一阶弯曲模态频率的理论计算结果与样机定子的模态测试实验的结果相差3.9%。提出杆式超声电机工作对定子模态的要求，推导了这些设计要求的数学表达形式。结合模式搜索算法，建立了定子结构参数的优化设计模型来解决这一多目标的优化问题。算例分析的结果表明，该优化模型可以在满足对模态频率、振型、压电陶瓷安放位置、避免干扰模态等要求的前提下，确定定子的相关几何参数，从而提高电机结构设计的效率。

关键词: 杆式超声电机;动力学分析;优化设计;优化算法

Abstract:

The finite element method was used to derive the electromechanical coupled dynamics model of the stator of a rod-shape ultrasonic motor due to the complexity of its geometric shape.The dynamic behavior of the stator was analyzed via this model and the numerical result of the first bending mode frequency is 3.9% of error compared with the experimental result of the prototype stator. Both the structural design principles and the approaches to meet the modal requirements for the stator were proposed and a mathematical optimal model was established based on the pattern search algorithm to solve this multi-objective optimization problem. The numerical simulation results show that this efficient optimal model can quantify the structural parameters of the stator and also meet the stator’s design requirements for the modal frequency,the mode shape,the location of the piezoelectric ceramics and the interference mode at the same time. 

Key words: rod-shape ultrasonic motor;dynamic analysis;optimal design;optimal algorithm

中图分类号:

TM356

朱华;曾劲松;赵淳生;. 杆式超声电机定子的动力学分析与优化设计[J]. J4, 2008, 19(21): 0-2524.

Zhu Hua;Zeng Jingsong;Zhao Chunsheng. Dynamics Analysis and Optimal Design of the Stator for a Rod-shape Ultrasomic Motor[J]. J4, 2008, 19(21): 0-2524.

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://www.cmemo.org.cn/CN/

http://www.cmemo.org.cn/CN/Y2008/V19/I21/0

[1]	孙志峻;黄卫清;. 多超声电机控制的鲁棒性参数设计[J]. J4, 2009, 20(19): 0-2274.
[2]	陶征;高建设;赵淳生;. 纵扭复合型超声电机定子的解析模型的研究[J]. J4, 2009, 20(15): 0-1770.
[3]	陈超;曾劲松;朱华;赵淳生;;. 微型行波超声电机定子的参数优化设计[J]. J4, 2009, 20(05): 0-629.
[4]	孙志峻;邢仁涛;黄卫清. 超声电机驱动多关节机器人的非线性H_∞控制[J]. J4, 2008, 19(19): 0-2272.
[5]	杨小兰;. 低速电机杆式谐波行星传动设计与仿真[J]. J4, 2008, 19(19): 0-2272.
[6]	李志荣;. 圆柱形多自由度超声电机椭圆倾角和接触角的研究[J]. J4, 2007, 18(22): 0-2771.

杆式超声电机定子的动力学分析与优化设计

Dynamics Analysis and Optimal Design of the Stator for a Rod-shape Ultrasomic Motor

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 6

编辑推荐

Metrics